Applicable to Mercedes-Benz Smart Car Door Kick Protection Pad Seat Anti-Kick Pad Anti-Dirty Stickers Car Interior Decoration Special

When You Get the Sticker, Please Recognize Its Structure First, Which Consists of Three Layers (of Course, Packaging Is Not Counted), Transfer Membrane, Sticker and PVC Bottom Layer. Uncover the Transfer Membrane, the Sticker Should Be Stuck on the Transfer Membrane, and the Back of the Sticker Has Adhesive Film.
Text Description:
1. Paste Method of Transfer Membrane Stickers with Transparent Light-Duty Vehicle (Dry Paste Method):
Tools: Rag, Scraper Or Credit Card
1. Clean the Car Body and Keep It Dry.
2. Determine the Position to Be Pasted. Under Normal Circumstances, Slowly Stick It on One Side, Scrape It with Tools, and Peel the Bottom Paper.
3. If the Figure Is Really Small, You Can Also Tear off All the Transparent Transfer Membrane and Stickers and Paste Them. But Care Must Be Taken to Avoid Accidental Adhesion.
4. after Pasting, Repeatedly Scrape and Press It Several Times. Tear off Transparent Transfer Membrane.
5. Use Art Knife to Draw a Knife on the Door and Seam, and Pack Natural Inward.
6. Do Not Let Bumper Stickers and the Car Body Have Any Separation Or Bulge.

2. Paste Method of Large Transfer Membrane with Transparent Bumper Stickers (Wet Paste Method):
Tools: Dishcloth, Sprinklers, Scraper Or Credit Card
1. Clean the Car Body and Evenly Sprinkle Water on the Part of the Car Body to Be Pasted-to Reduce the Viscosity of the Sticker and Facilitate the Adjustment of the Position.
2. Determine the Position to Be Pasted. Slowly Stick It on One Side, Gently Scrape It with Tools, and Peel the Bottom Paper.
3. in Case of Door Handle Or Anti-Scratch Strip, Cut the Materials and Wrap Them in According to the Situation.
4. Adjust Appropriately. after Making Sure That the Graphic Approximate Location Is Correct, Wipe off Water and Bubbles Repeatedly. Tear off Transparent Transfer Membrane.
5. Use Art Knife to Draw a Knife on the Door and Seam, and Pack Natural Inward.
6. Do Not Let Bumper Stickers and the Car Body Have Any Separation Or Bulge.
7. Try to Dry the Water in Bumper Stickers, and Heat and Dry It Moderately If Necessary. According to the Weather, Wash the Car in a Day Or Two.