Adblue OBD2 Emulator For Man Truck Euro6

GH₵ 645.25

GH₵ 921.1330%

In stock

Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 54.69 to Tema

0 out of 5

(No ratings available)

Variation available

ONE SIZE FITS ALL

Promotions

Enjoy cheaper delivery fees when you select a pickup station at checkout Free Delivery in Accra for Orders above GHC120. Pick-up stations only! (Excluding Large)

Report incorrect product information

Delivery & Returns

Shipped from abroad

Choose your location

Pickup Station

Delivery Fees GH₵ 54.69

Ready for pickup between 18 July & 23 July when you order within next 5hrs 45mins

Door Delivery

Delivery Fees GH₵ 66.59

Ready for delivery between 18 July & 23 July when you order within next 5hrs 45mins

Return Policy

Free return within 15 days for all eligible items.Details

Seller Information

thoroughbred

60%Seller Score

Be the first to follow

Seller Performance

Order Fulfillment Rate: Excellent

Product details

Adblue OBD2 Emulator for Man Truck Euro6
1. It is possible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime.
2. EURO6 AdBlue Emulators Disable system: AdxBlue system (Fully) / AdxBlue NOX sensor / DPF system / DPF temperature sensors / DPF regeneration.
3. After installing Euro6 Emulator, you can remove: DPF sensors / NOx sensor (only in DAF dona??t remove first NOx sensor) / Adblue temp. sensor / Adblue pump / Adblue level sensor / Adblue ECU.
4. Emulator Man Euro 6 does not need to be learned. You install emulator under the metal cover of AdBlue Pump on the right side behind the cab, and disconnect plug from AdBlue Pump and connect emulator.
5. Next, you need to remove the fuses:
F894(Multisensor In AdBlue tank)
F738 (+30 Signal of AdBlue pump)
F1084 (NOx sensor Upstream)
Fuse F737 is now fuse of emulator.
Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regeneration.
6. Finally, you need to remove Power from NOx downstream sensor. There are two ways options, one is to cut pin 1 in NOx sensor plug, the other way (better) is to remove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) with yellow key.