Adblue Emulator EURO 6 For Scania For Volvo For Mercedes Benz Truck For MANEU6 For IVECO

Adblue Emulator EURO 6 For Scania For Volvo For Mercedes Benz Truck For M-A-N AdBlue Emulator Box Ad Blue Emulator EU6 ForTruck

Purchase Notes:

Dear friends, if you need the PDF format of the installation manual, please contact us

Adblue Emulator for Sca-nia Euro6 ：

Not need to be leaming, you have to mount emulator in the plug of the EEC(AdBlue)ECU(in the pink one),Yon can find EEC ecu ta the center of the vehicle frame.Two big plugs(one is pink) in this manual you will find pin mumber of the EEC plug,also colours cables of EEC and Emulator.

Adblue Emulator for Sca-nia Euro6:

Emulator for S-ca-nia Euro 6 not need to be leaming

You have to mount emulator in the plug of the EEC(AdBlue)ECU(in the pink one),Yon can find EEC ecu ta the center of the vehicle frame.Two big plugs(one is pink)

in this manual you will find pin mumber of the EEC plug,also colours cables of EEC and Emulator.

Connect wires of the emulator with this table as reference:

Red(Vcc)-PIN 12 (green) Cut the cable ar connect emulator to truck side

Black (GND)-PIN 4 (black)

Yellow (CAN H）-PIN 22 （orange)

Green (CAN l)-PIN 19 (black)

AdBlue Emulator Installation For Merc-edes Be-nz EURO6：

Behind fuses in the middle is a plug- as in the price (not right like in manual-correct is middle)

Connnection colors-(Emulator side) with Blue (Truck side) with (Truck side)

Red wire from emulator connection with any(+)ar ignition

Black i GND

step is remove Fuse

F23 Thats all

For Merc-edes Atego Euro 6 AdBlue Remove Emulator Installation：

You must locate the ACm Module and remove the socket.

The cable should be installed as shown in the picture below.

Emulator cable(CAN H) ----->Atego vehicle socket 10 pin(CAN H)

Emulator Brown cable (CAN L) -----> Atego vehicle socket 20 pin (CAN L)

Emulator Red (+) ----->Atego vehicle Positive(+)Cable

Emulator Black(-) ----->Atego vehicle GND (-)

Ar installation, you must remove errors with fault detecting device.

The For Mercedes DTC fault code eraser can also be used to erase the fault in your Atego vehicle

You will not mount the socket back into the ACM module Isolate the Atego ACh nodule without damage.

You should definitely cancel the DPF ar installing the AdBlue Removal Emulator：

Adblueobd2 Emulator for M-A-N Euro6 is specially for M-a-n Truck Euro6.

EURO6 AdBlue Emulators Disable System:

AdxBlue system (Fully)

AdxBlue NOX r

DPF system

DPF temperature r

DPF regeneration

Ar installing Euro6 Emulator, you can remove:

DPF rs – YES

NOx r – YES (only in DAF don’t remove first NOx r !!!)

Adblue temp. r (s) – YES

Adblue pump – YES

Adblue level r – YES

Adblue ECU – YES

Kindly note: It is poible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime.

EURO6 AdBlue Emulators using guide:

Emulator For M-a-n Euro 6 does not need to be learned. You install emulator under the metal cover of AdBlue Pump on the right side behind the cab, and disconnect plug from AdBlue Pump and connect emulator.

, you need to remove the fuses:

F894(Multir In AdBlue tank)

F738 (+30 Signal of AdBlue pump)

F1084 (NOx r Upstream)

Fuse F737 is now fuse of emulator.

Fuse F1109 is the fuse of NOx r Downstream and A1191 mufler temperature r. This r needs to work correctly for DPF regeneration.

Finally, you need to remove Power from NOx downstream r. There are two ways options, one is to cut pin 1 in NOx r plug, the other way (better) is to remove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) with yellow key.

Package List:

1pc x Adblue Emulator For Euro6

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.