Detailed Information About The Product:
AD584 is an eight-pin precision voltage reference, a programmable four common output voltages: 10.000 V, 7.500 V, 5.000 V and 2.500 V.
The device uses trimming technology to adjust the pin-programmable output levels and temperature coefficients, so as to obtain the most flexible single-chip, high-precision reference voltage source.
AD584 is recommended as an external precision reference voltage source of 12 or 14 bit digital to analog () / analog to digital (ADC) converter reference voltage source, and its performance is usually the standard stand-alone reference.
Onboard 15V battery, we know that the battery is the lowest noise so that it can output pristine, stable voltage to provide a reliable.
The board has four programming terminals ,each corresponding to an output voltage, short circuit by short-circuiting the corresponding terminal block to give the corresponding voltage. Because the AD584 programming pins in programming its short resistance will affect the output voltage, in order to reduce the short-circuit resistance, two terminals in parallel. Alternative switch terminal advantage are more reliable and flexible, short-circuit resistance can be smaller. Temperature coefficient: 5 ppm / Celsius (maximum, 0 Celsius to 70 Celsius, AD584L) 15 ppm / Celsius (maximum, -55 Celsius to + 125 Celsius, AD584T)
Power Consumption: Static current: 1 mA (max), low quiescent current is perfect for battery-powered.
Load capacity: 10 mA
Operating voltage: 4.5V to 30V, note that the required operating voltage higher than the programmed output voltage
Temperature range: AD584J / K / L rated operating temperature range of 0 Celsius to + 70 Celsius, AD584S / T, with -55 Celsius to + 125 Celsius.
The external power supply interface, you need more than 11V DC voltage
The reference voltage output interface with copper 2mm socket for easy card into the pen multimeter to measure or calibrate other instruments.
Each board at the factory to be detected with Aglient 6 digit multimeter, and marked with the output voltage, user-friendly.
Before detect multimeter and board warm-up at least 30 minutes at room temperature 25 degrees, to that the detection accuracy.
The following are six and a half Agilent multimeter measured 2.5V voltage output effect,2.49978V and standard error is small.
Colour: yellow
Material: metal Package Contents:
1 * Reference Module (different batches, some parts may be different in color, which will not affect the use) Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !