AC 12V3A 24V1.5A 36W Switching Power Supply Module Bare Circuit 220V to 12V 24V Circuit Board for Replacement/repair

AC 12V3A 24V1.5A 36W Switching Power Supply Module Bare Circuit 220V to 12V 24V Circuit Board for Replacement/repair

Descrtion:

Input: AC100-240V 50 / 60Hz

Output: DC12V 3A or 24V1.5A (two versions, please choose the version you need)

Protection: short circuit protection, overload protection, over temperature protection

Weight: 100G

24V 1.5A Photo display

12V 3A Descrtion:

*This product is an 36W AC to DC plug-in, Cla II, single output

power device with constant voltage sources.

*This specification is applied as descrtion of electrical &

mechanical characteristics for AFC.

ELECTRICAL CHARACTERISTICS

1. Input Characteristics

1.1AC input voltage

Rated input voltage: 110 ~ 240Vac

1.2 AC input frequency

Rated Input frequency: 50－60 Hz

1.3 AC input current

Maximum: 600mA

1.4 AC inrush current

Inrush current will be le 40A at input 230Vac

cold start at input voltage 90-degrees cut angle for sine

wave with full load.

2. Output Characteristics

2.1 Output voltage

Output voltage :DC11.9V-12.4V

2.2 Output current

Output current: 0~3000mA

3 Efficiency

Efficiency 80% Min. at 115Vac and 230Vac input and output

100%Load

4 Power Saving

Input voltage @230Vac/50Hz, will not exceed 0.5W (Max)

5 Rple & Noise

5.1 limit: Output voltage 10% max.

5.2 Test condition: This is measured over bandwidth of 20MHz

at the power supply output connector a 47μF electrolytic

capacitor in parallel with a 0.1μF ceramic capacitor in 5

minutes after the supply starts up.

6 Turn on delay time & Rise time

6.1 Turn-on delay time At turn on moment, From AC input

turn on to output voltage rise to 90%, The time will le

than 3 Secs. At input voltage range with full load.

6.2 Rise time At turn on moment, The output voltage from

10% to 90% rise time will be le than 10mS. At input

voltage range with full load.

6.3 Over shoot will be le than 10% of normal voltage

value.

6.4 Hold up time At turn off moment, From AC input turn off

to output voltage fall to 90%, The time will be more than 10mS. At input voltage range with full load.

7 Protection

7.1 Short circuit protection When output short circuited,

output voltage peak value will be le rating output

voltage, with auto- recovery function

7.2 Over current protection Over current protection point

will be le than output current 110%-200% with

auto-recovery function.

7.3 Over voltage protection point will be le than output

voltage 110%-150%

SAFETY REQUIREMENT

1 HI-POT

Between primary to secry: 1200Vac 50Hz for 1 minute,

In Production line shall be more than 2 sec,

Test current will be le 10mA

Adapter is no damage after completion of the test

RELIABILITY

1 Burn-in

100% Burn - in at 80－100％ loading and 2 hours at 40 +/- 5℃

Environment temperature.

2 AC input ON/OFF test

AC input voltage: 115/230Vac

AC input ON/OFF cycle: min 5 secs/ 5 secs

AC input ON/OFF times: 10,000

ENVIRONMENTAL CHARACTERISTICS.

1 Temperature

operating temperature range: 0 to 30℃

Storage temperature range: -10 to 70℃

2 Humidity

Operating humidity: Max 90%

Storage humidity: Max 90%

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.