Continuously press the light switch 3 , the white light flashes to enter the distribution network mode, and the white light flashes to enter the compatible distribution network mode.
APP can set the brightness of RGB white light, you can the lantern / scene light mode
APP supports timing function
APP support lamp name modification function
APP supports voice control
Each time the power is turned on, the hot spot is scanned. If the production test fails, the red light is always on, and the production test is successful. R G B W Automatic interval 1s is after 10 minutes. Switch to the aging mode.
W (rgb does not light) keeps on for 20 minutes RGB (w does not light) and lights up for 10 minutes at the same time
Continuously power on more than 3 in the production test mode. Exit the production test mode and enter the normal distribution mode.
If you have a network, you need to use the app to remove or power on three to enter the distribution mode. Keep power on for more than 10 seconds. Power off and then power on again to re-enter the production mode.
Rated power: 10W (10+2)
Input voltage: 100~240V
: 900 Working temperature: 0 ° C - 40 ° C
Wireless type: Wi-Fi 2.4GHz
APP supports : Android 4.1 / IOS 8.0 version and above
Material: plastic
colour:White
Package Contents:
1 * WiFi smart light bulb
1 * Instruction
Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.