915 Generation Rainbow Flames Hydrographic Film Water Transfer Printing

Detailed Information About The Product:

1. PREPARATION - Make sure the item has been stripped of grease, dirt and gunks and other stuff that may interfere with the adhesion of your design. Durability of any hydrographics coat depends upon complete and careful preparation of the surface before painting. The surface should be even and smooth. Any cracks, and holes or any other imperfections do not let the paint adhere correctly to the surface. Inadequate surface preparation results into majority of failures.
2. PRIMER PAINT - Use the appropriate primer for your substrate. It may depend whether its a metal, plastic, fiberglass, ceramic or wood. Consult your local paint shop for the best option with your market .
3. PAINTING THE BASECOLOR - Paint your preferred basecolor. Most of the patterns are transparent so it a color of your choice would greatly affect your overall output.
4. ACTIVATION & DIPPING - Lay the film in the water. Make sure the 'sticky side' Remove creases/folds or bubbles underneath the print by blowing it lightly. Wait 60-80 seconds before activating it. Spray the activator as consistent as much as possible and without too much disturbance on the water. Once properly activated, submerge your subject by getting into the water on an angle to avoid trapping bubbles.
5. WASH - Wash your dipped item using a running water to get rid of the sticky residues left by the print and let it dry for a while.

6. CLEARCOAT - Spray the clearcoat to protect your print and item once its dry. It would be your choice whether its a gloss, a semi-gloss, or a flat finish.
Usage: Use to water transfer printing technology.
Hydrographics or HydroGraphics, also known as immersion printing, water transfer printing, water transfer imaging, hydro dipping, watermarbling or cubic printing, is a method of applying printed designs to three-dimensional surfaces. The resulting combinationsmay be considered decorative art or applied art. The hydrographic process can be used on metal, plastic, glass, hard woods, and various other materials.
size:Applique 50cmx100cm, thickness is about 0.03mm
Material:PVA
colour:Multicolor

Package Contents:
1 x Water transfer hydrodipping film

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !