Detailed Information About The Product:
M.2 B+M AQC107 10G embedded industrial-grade network adapter, using high-performance Marvell AQC107 Ethernet controller.
Marvell AQC107 controller has Base-T copper network interface, supports 10GBASE-T/5GBASE-T/2.5GBASE-T/1000BASE-T /100BASE-T and PCIe Gen3x4 or Gen2x4, AQtion Ethernet controller can easily handle 10GbE lines speed performance.
The AQC107 incorporates Aquantia's AQrate® PHY technology to deliver 10GbE networking speeds over Cat 6a and 5 GbE and 2.5 GbE networking speeds over 100 meters of Cat 5e or better cable, enabling higher data rates , with zero changes to conventional wiring.
Designed for: Any mobile device, desktop, workstation, value server or industrial design with strict space constraints. System Requirements:- Win 7/ Win 8/Win 8.1/Win 10/Server 2012/ Server 2016 32 or 64bits, Linux Kernels3.10 and above, available M.2 B+M KEY slot.
Compliant with PCIE Express Revision 3.0 and downstream PCI Express Reivison2.0. Each line supports 8.0GT/s and 5.0GT/s line speed. Support Gen3 x4 or Gen2 x4. Support communication and management functions. Integrated Aquantia AQrate PHY with NBASE-T Technology. Support PHY specification through 10GBASE-T /5GBASE-T /2.5GBASE-T /1000BASE-T /100BASE-T.
On-chip high-resolution cable analyzer for advanced cable diagnostics
Energy Efficient Ethernet (EEE) support
Support IEEE1588v2 precision time protocol
Supports large send offload, receiver scaling (RSS), direct cache access (DCA) and headers
Checksumming improves network performance and reduces host CPU utilization
Wake-on-LAN (WoL) power management
Supports IPv4, IPv6 and IPv6/UDP checksum offload
Supports jumbo frames (up to 16kbytes)
Quality of Service (QoS)
Supports up to eight traffic classes and Data Center Bridging (DCB)
Chip processor:Marvell/AQC107
Applicable network:10GbR server network card
Main controller:Marvell AQC107
Bus type:M.2 B+M KEY
Media interface:1 x RJ45 copper cable
Transmission rate:10G/5G/2.5G/1000/100Mbps
Network topology:10GBASE-T / 5GBASE-T / 2.5GBASE-T / 1000BASE-T / 100BASE-T
IEEE 802.3bz, IEEE 802.3, IEEE 802.3x, IEEE 1588, IEEE 802.3az
-Energy Efficient Ethernet (EEE)
Management functions:IPMI pass-through via SMBus or NC-SI, iSCSI boot, WoL, PXE remote boot, VLAN filtering
Firmware environment:
Operating temperature:0 - 55°C (32 - 131°F)
Storage temperature:-40 - 70 ℃ (-40 - 158 ℉)
Storage humidity:90% non-condensing relative humidity at 35°C
Colour:Green
Material:PCB
Package Contents:
1 x Network Card
1 x CD
1 x Short Iron Piece
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !