915 Generation 4G & 5G Base HAT Expansion Card for RM500Q/SIM8200/GM800

Detailed Information About The Product:

1. Fully compatible for Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+)
2. Supports the following brand M.2 5G Modules: for Quectel: RM500Q RM500U; for Gosuncn: GM800; for Sierra: SIM8200
3. Compatible the following brand Boards: for Raspberry Pi 4, 3, 2, B+; for Asus Tinker Board; for Rock 64*; for Samsung ARTIK's board; for Latte Panda
4. Clip-in M.2 socket compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers
5. MANO SIM Card socket can easily reachable on the upside of the HAT. Efficient and low quiescent current power circuit can hold up to 3Amps

Product name: M.2 expansion card for Raspberry Pi
Working temperature range: -40°C ~ 80°C
Product size: 85 x 56mm
Note 1: The Base HAT doesn't need driver. Rather The host computer(such as RPi, Asus Tinker Board) needs the driver of the compatible module that will be used with the Base HAT. For example, if you are using Quectel's EC25 with the Base HAT, then your host device should have the driver for Quectel EC25. Nowadays, most of the Linux kernel comes with the required drivers installed as a result the modules are recognized.
Note 2: These compatibility list created by assuming you've connected the Base HAT to the device via USB. UART communication can be work with every device in the list easily which have 3.3V level UART port.
color:Black
Material:PCB

Package Contents:
1 x 5G/4G