868Mhz/915Mhz LoRaWan Gateway Module Development Board Based on ESP32 with 1.8" LCD - 1 for Long Range Communication

868Mhz/915Mhz LoRaWan Gateway Module Development Board Based on ESP32 with 1.8" LCD - 1 for Long Range Communication

Description

LoRaWan technology is a new and increasingly in-demand technology that has been widely applied in the field of the Internet of Things, especially in the industrial and agricultural sectors. This latest design of a single- gateway is the best initial device choice for learning and acceing Lorawan networks. It is designed to provide internet connectivity for our Lora series products.

It uses ESP32-WROOM-32 as the main controller, with Ra-01H module as the Lora RF nsceiver module, and has two versions available for different frequency bands (868MHz and 915MHz). The ESP-WROOM-32 its supports WiFi and Ethernet interfaces and can connect to the TTN backend network to enable gateway settings and data nsmiion monitoring.

It supports Lorawan 1.0.3 and is compatible with other Lorawan . When combined with sensor nodes and The Things Network cloud control panel, it can form a complete Lorawan sensor acquisition system.

In addition, we have equipped it with a 1.8-inch resistive touch screen with a resolution of 128x160, which uses an interface. With this touch screen, it is more convenient to observe the gateway's data nsmiion status, check the IP data obtained by the gateway, etc. This module is powered and programmed through a Type-C interface, and it also has red and blue indicator lights showing its working and data nsmiion status. Equipped with the 2.5Dbi , it can achieve a communication distance of up to 1.5km in bstructed and interference-free environments. Even in urban areas, the farthest distance can reach 0.7 km. Replacing the with a higher gain one can achieve even longer communication distances. This device comes with an acrylic shell that not only has a small and exquisite design but also serves as a protective cover.

LoRaWan Gateway Modulecan be used with LoRa node modules, LoRa development boards, and other devices to build a LoRa WAN IoT network, providing a reliable communication solution for applications in smart homes, industry, and agriculture control, among others.

Feature

Uses ESP32 WROO2 as the main controller, with a dual-core 32-bit LX6 microproceor from Xtensa, providing better performance.

Integrates RA-01H module supports frequency band: 803MHz - 930MHz.

Onboard 1.8-inch 128*160 -TFT-LCD, ST7735S driver chip

Not only supports ESP32 WIFI network connection but also has a 10/100Mbps RJ45 interface that allows Ethernet connection

Compatible with and Micropython, ing it easier for developers to create custom applications and functionality

Exquisite acrylic protective shell and small and portable design, ing it easy to carry and use

Name

Definition

PWR

Red power indicator light, always on when power on, off when power off

DATA

Blue data indicator light, fing when data is g sent and received, and off by default

RESET

Reset on. Pre this on to reset the system.

BOOT

Download on, hold down the Boot on, and pre the RESETon to start the download mode. Users can download through the USB interface

USB-C

USB-C interface, which is used as the power supply of the gatewaymodule and the communication interface between the PC and ESP32

WIFI

ESP32 2.4G WIFI SMA interface

LORA

868MHZ/915MHZ LORA SMA interface

Ethernet

100Mbps Ethernet RJ45 interface

IO port definition

GPIO0

BOOT

GPIO1

TXD0

GPIO2

RXD0

GPIO3

RXD0

GPIO4

LCD_DC

GPIO5

DATA

GPIO6

NC

GPIO7

NC

GPIO8

NC

GPIO9

NC

GPIO10

NC

GPIO11

NC

GPIO12

RA_RST

GPIO13

RA_DIO1

GPIO14

RA_NSS

GPIO15

XP_CS

GPIO16

LCD_BLK

GPIO17

RMII_CLK

GPIO18

ETH_MDIO

GPIO19

RMII_TXD0

GPIO20

NC

GPIO21

RMII_TX_EN

GPIO22

RMII_TXD1

GPIO23

ETH_MDC

GPIO24

NC

GPIO25

RMII_RXD0

GPIO26

RMII_RXD1

GPIO27

RMII_CRS_DV

GPIO28

NC

GPIO29

NC

GPIO30

NC

GPIO31

NC

GPIO32

MOSI

GPIO33

SCK

GPIO34

RA_BUSY

GPIO35

MISO

GPIO36

NC

GPIO37

NC

GPIO38

C

GPIO39

PEN

Specification

Main Proceor Chip

ESP32 WROO2 with dual-core 32-bit LX6 microproceor from Xtensa @ 240MHz

LoRa RF nsceiver module

RA-01H

RA-01H Supports frequency band

803MHZ-930MHZ

RA-01H Support modulation method

FSK、GFSK、MSK、LoRa

Single

Support Lorawan protocol

Support Lorawan 1.0.3

WiFi

SMA 2.4G WiFi

Communication distance

Obstructed state: up to 1 km

bstructed state: up to 1.8 kilometer

Development environment

/Micropython

Interface and function

1x USB-C interface,

1x Ethernet Interface,

1x Boot on,

1x Reset on,

2x Indicator Lights.

Working input voltage

USB DC-5V

Operating Temperature

-10°C ~ 65°C

Dimension

65mm(L)x58mm(W)

Package List

1xLoRaWan Gateway Module

1x LoRa (868Mhz/915Mhz)

1x WiFi

1x USB Cable

Wiki & External links

Wiki