8 Ohm 12w Ndfeb Magnet 2 Inch 53mm Full Range Audio Speaker Exquisite Tweeter Amplifier Bluetooth Diy Home Theater Loudspeaker

GH₵ 437.33

GH₵ 758.4542%

In stock

Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 40.13 to Tema

0 out of 5

(No ratings available)

Variation available

Not Specified

Promotions

Shipped from abroad

Delivery Fees GH₵ 40.13

Ready for pickup between 13 January and 16 January if you place your order within the next 1hrs 47mins

Delivery Fees GH₵ 52.03

Ready for delivery between 13 January and 16 January if you place your order within the next 1hrs 47mins

Free return within 15 days for all eligible items.Details

yangjiashengtaiyu

60%Seller Score

Be the first to follow

This seller does not have enough history for us to evaluate his performance yet

Input Power(w):
Storage Temperature:-30鈩?To +60鈩?/li>
Cold Test:Must Be Normal After Having Been In A Test Chamber For 96 Hours At The Condition Of-20鈩?plusmn;2鈩?And Then Left 2 Hours In A Room.
Heat Test:Must Be Normal After Having Been In A Test Chamber For 96 Hours At The Condition Of+50鈩?plusmn;2鈩?90~95% R.h And Then Left 2 Hours In A Room.
Load Test:Must Be Normal After Load Test :white Noise 12.0w 96 Hours. At Rated Frequency Range
Short Term Maximum Power Test:Test For 1 Hour Under Maximum Power. Input Shall Be White Noise In Rated Frequency Response. And The Signal Will Be 1 Second On, 59 Seconds Off, Total 60 Cycles At Rated Frequency Range, Must Be Normal After The Test
Drop Test:Drop The Speakers Contained In Normal Box Onto A Board 5mm Thick 2 Times From A Height Of 1.0m . Must Be Normal After The Test
Terminal strength:A Static Load Of 5.0n Shall Be Applied To The Terminals For 10s In Any Direction Between Terminal Block And Frame And Between Terminal Block And Fasten Terminal. Must Be Normal After The Test
Polarit:When A Dc Source S + Polarity Is Attached To Speaker S + Polarity, - Polarity Is Attached Speaker S - Polarity, The Membrane Will Move Forward. Red Wire Is + And The Black Wire Is -

Input Power(w):
Storage Temperature:-30鈩?To +60鈩?/li>
Cold Test:Must Be Normal After Having Been In A Test Chamber For 96 Hours At The Condition Of-20鈩?plusmn;2鈩?And Then Left 2 Hours In A Room.
Heat Test:Must Be Normal After Having Been In A Test Chamber For 96 Hours At The Condition Of+50鈩?plusmn;2鈩?90~95% R.h And Then Left 2 Hours In A Room.
Load Test:Must Be Normal After Load Test :white Noise 12.0w 96 Hours. At Rated Frequency Range
Short Term Maximum Power Test:Test For 1 Hour Under Maximum Power. Input Shall Be White Noise In Rated Frequency Response. And The Signal Will Be 1 Second On, 59 Seconds Off, Total 60 Cycles At Rated Frequency Range, Must Be Normal After The Test
Drop Test:Drop The Speakers Contained In Normal Box Onto A Board 5mm Thick 2 Times From A Height Of 1.0m . Must Be Normal After The Test
Terminal strength:A Static Load Of 5.0n Shall Be Applied To The Terminals For 10s In Any Direction Between Terminal Block And Frame And Between Terminal Block And Fasten Terminal. Must Be Normal After The Test
Polarit:When A Dc Source S + Polarity Is Attached To Speaker S + Polarity, - Polarity Is Attached Speaker S - Polarity, The Membrane Will Move Forward. Red Wire Is + And The Black Wire Is -