6000W Car Power LED Voltage Capacity Display nsformer Converter 12V to 110/220V Dual USB for Car Appliances

Main Features:

Car power with 2 USB ports and AC power socket. Surge power: 4000W/6000W, the comes with a free arette and 2 battery clips, providing continuous power of 300W/500W, peak power of 4000W/6000W (please ensure that the total rated power of the connected device is le than or equal to 300W/500W ).

One AC power socket and two USB ports can provide 100% fast charging for mobile phones, computers, laptops, s, s, s, res equipment, equipment, etc., and can be used as power supplies.

The LED battery level bar shows the battery capacity and can alert you when the battery is dead. When the battery is connected to the , the LED screen works and displays the real-time capacity of the battery. It has 5 levels (dot matrix) of battery level bars, each grid represents 20% of the battery power. When your battery is dead, the display will f to remind you that you need to recharge the battery.

Built-in fuse, safe charging design and cooling fan to prevent the car power converter from overheating, saving electricity and energy. Overvoltage, overload, overcurrent, short circuit, undervoltage, overheating, and short circuit protection.

Lightweight and compact, it is very suitable for vacation, camping and work trips. It can be plued into almost any vehicle with 12V power output, providing charging opportunities anywhere.

1. Please try to use our standard battery line, otherwise the full power output cannot be achieved!

2. startup: start the first, and then turn on the load; Shutdown: Disconnect the load and then shut down. .

3. Do not connect the mains to the output port, and do not re connect the battery with load.

4. Do not overload with household appliances, such as with motor water , air conditioning and other inductive load, please multy the rated power by at least 3 times, the value shall not exceed the power.

5. If the buzzes in red light, please chewhether it is overloaded and whether the battery is full (no matter whether your battery is new or not, please charge the battery for at least 3 hours and try again).

6. Turn off the when the is not in use.

7. When the buzzes, disconnect the load first, turn off the switch, and then chethe problem.

Input: DC 10V-15V 250W/450W

Output: AC 110V/220V

Peaks Power: 4000W/6000W

Rated power: 300W /500W

Output frequency: 50Hz-60Hz

Output waveform: Modified sine waves

efficiency: 90%

Certification: CE ROHS

Size: 165*112*56mm

Color: Blue

1 x Power

2 x Battery Clip

1 x arette Plug

1 x User Manual

Please allow 1-3cm differences due to manual measurement.

Due to the difference between different monitors,the picture may not reflect the actual color of the item.Thank you!