6 Color Auto OBD2 Connector Diagnostic Adapter Cable for FiatECUScan and ecu

6 Color Auto OBD2 Connector Diagnostic Adapter Cable for FiatECUScan and Multi scan for Fi-at Al-fa Ro-meo and for Lan-cia

Some Notes About the Companion Diagnostic Tool:

We only provide hardware (without software). If you need software :" FiatECUscan" , please go to the official website to buy it.

Product appearance is for reference only, subject to the actual product

Designed to meet the requirements of the Multiecuscan diagnostic system, the product is perfectly compatible with the FiatECUScan.

Specification:

Green Adaptor Lead (Multi-ECUScan / FiatEcuScan Adaptor 1) = Engine, ABS, Power Steering

Red Adaptor Lead (Multi-ECUScan / FiatEcuScan Adaptor 2) = Aig

Yellow Adaptor Lead (Multi-ECUScan / FiatEcuScan Adaptor 3) = CAN

Purple Adaptor Lead (Multi-ECUScan / FiatEcuScan Adaptor 4) = Electric Hood

Blue Adaptor Lead(Multi-ECUScan / FiatEcuScan Adaptor 5)= Control Module

Gray Adaptor Lead(Multi-ECUScan / FiatEcuScan Adaptor 6)= base control module

Pin Configurations:

Green Adaptor Lead = Female pin 7 to male pins 1,7,9,12.

Red Adaptor Lead = Female pin 7 to male pin 3

Yellow Adaptor Lead = Female pin 6 to male pin 1 / Female pin 14 to male pin 9 / Female pin 7 to male pin 12

Purple Adaptor Lead = Female pin 7 to male pins 7,8,11,13

Descrtion：

1.Green ABS / Power Sreeing adapter lead ( "Adapter 1" on Multi-ECUScan website)

-Designed to allow acce to the ABS and Power Steering syst on supported vehicles. This adapter has a green connector on one end for easy identification.

Using this adapter, Pin 7 on the diagnostic tool is connected to Pins 1,7,9 & 12 on the car.

2.Red Aig adapter lead ( "Adapter 2" on Multi-ECUScan website)

-Designed to allow acce to the Aig system on supported vehicles.

This adapter has a red connector on one end for easy identification.

Using this adapter, Pin 7 on the diagnostic tool is connected to pin 3 only pn the car.

3.Yellow CAN adapter lead ( "Adapter 3" on Multi-ECUScan website)

-Designed to allow acce to the low-speed CAN system on supported vehicles.

This adapter has a yellow connector on one end for easy identification.

Using this adapter, Pin 6 & 14 on the diagnostic tool are connected to pins 1 & 9

Respectively on the car, Pin 7 on the diagnostic tool is connected to pin 12 on the car.

4.Purple Electric hood adapter lead ( "Adapter 4" on Multi-ECUScan website)

-Designed to allow acce to the electric hood system on supported vehicles.

This adapter has a purple connector on the end for easy identification.

Using this adapter, Pin 7 on the diagnostic tool is connected to pins 7,8,11 & 13 one the car.

5.Blue Control Module Adapter Wire Design allows acce to enhanced features on the vehicle (eg, multimedia, blind spot rs, etc.)

6.Gray base control module adapter wire designed to allow acce to basic functions on the vehicle (eg headlights, parking controller, ABS, electric steering, etc.)

Support and Parameters：

This product supports the following brands vehicles:

for Je-ep

for Ch-rysler

for Do-dge

for FI-AT

for LAN-C-I-A

Please refer to the 'Multi-ecuscan' official website for more information

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.