5V LCD Type-C Battery Capacity Tester for 18650 Lithium Battery Digital Measurement Power Detector Module W/ Charging Discharge

Package : SMDis_customized : YesApplication : ComputerCondition : NewType : Voltage RegulatorBrand Name : pcbfun : Mainland China
LCD Display:Product selling point:1: Wide range of applications2: Added charging function3: Exquisite and compact appearance4: LCD display5: Preset three working modes18650 battery capacity tester LCD display (with charging function) type-c port:Test voltage: ≤5VDisplay mode: 128×64px LCDCapacity range: 99999mAhEnergy range: 99999mWhTiming range: 999:59:59Working battery: Flat head 18650 batteryPower interface: Type-CExternal working power supply: 5V 1A (power supply is self-contained, just use a mobile phone charger.) The charging mode (Charge) and the automatic mode (AUTO-TEST) need to be connected to an external working power supply for normal use.Product size: 115×81×31mm (product); 150×100×40mm (packaging),Product weight: 110g (including packaging); net weight 74gSafety reminder: The load resistor will release a high temperature of 60~80℃ during discharge. Keep ventilation when using it, avoid close to flammable and explosive substances, and notify you to pay attention to safety and avoid burns.Working mode (need to connect to 5V power supply):AUTO-TEST automatic mode (power-on default mode)Start → charge (charge current less than 0.12A, trigger full charge, stop charging) → discharge (load voltage less than 2.7V, trigger discharge completion) → charge (charge current less than 0.12A trigger full charge, stop charging) → complete stop①The capacity and energy value are not recorded during charging, only the time is counted.② Record the capacity and energy value during discharge, both are timing.CHARGE (Charge Mode):Start → charge (charging current is less than 0.12A to trigger full charge, stop charging) → complete stop①Only record the charging time, not the charging capacity and energyDISCHARGE (discharge mode):Start → discharge (load voltage is less than 2.7V, trigger discharge complete → complete stop)①Record the discharge capacity, energy and time.Note:①During the discharge process, as as it detects that the battery load voltage drops to 2.7V, the discharge will stop. After the discharge is stopped, the battery is no-loaded, and the voltage will rise; a single discharge process can only detect that the voltage drops to 2.7V for the first time after the start of self-discharge and triggers the stop of discharge. The capacity released by the first-stage battery can be simply understood as a single usable capacity, rather than the rated battery capacity.② Shut down and restart; switch modes; press the start on to clear all data, and shutdown does not save historical data.③Test ① install 18650 battery for testing, Test ② use type-c external power bank or ≤5V power supply for testing, but Test ① and Test ② cannot be used for testing at the same time, to avoid accidents caused by overshoot in the unprotected state of 18650 battery.④ To run the charging mode, an external working power supply is required.Package Included:1* Battery capacity detectorNew LCD Display:Product selling point:1: Specially used to measure 18650 battery capacity2: The integration of charging and discharging eliminates the tedious operation of disassembling and assembling the battery to replace the charging and discharging of the device3: The size of the discharge current can be switched and it is convenient to use4: Small size, easy to carry5: stable performanceThis product is a 18650 battery capacity tester, which is specially used to measure the capacity of 18650 batteries. The 1.77-inch TFT display can simultaneously display information such as battery internal resistance, capacity, voltage, current, power, etc.; The tedious operation of charging and discharging equipment; preset three modes of automatic, charging and discharging, after selecting the corresponding mode, start the equipment, and the program will run automatically; the size of the discharge current can be switched for convenience.Technical parameter:①Install the power supply 18650 battery and the 18650 battery to be tested;②Use the Type-C data cable to connect the Type-C power supply port to the 5V power supply. The external power supply is used to charge the battery in the CHG state. If you only need to discharge the DSG, you can leave it unconnected;③Select the mode, the default is AUTO automatic mode;④Click the Start on to start the program;⑤Wait for the process to end and the status indication to stop.About power-off storage:This product has no power-off storage function. Shutting down, restarting, and switching the working mode can cause the accumulated data to be cleared (as shown below).01It can be used wellThe working mode corresponds to the state changeProduct name: 18650 battery capacity internal resistance tester charging and discharging integrated versionWorking voltage: DC5VDetection voltage: ≤DC5VCapacity measurement range: 0~99999mAhEnergy measurement range: 0~99999mWhBattery internal resistance measurement: support, measurement error is about 10%Display real-time voltage: supportDisplay real-time current: supportDisplay real-time power: supportLog run time: supportWorking mode indication: supportCurrent Status Indication: SupportedSimultaneous discharge: not supported (simultaneous discharge of 18650 battery Test① and external power supply Test② is not supported)Discharge load: 10W 8ΩJ cement resistance × 2Discharge current selection: ≈0.5A or ≈1ACharging interface: Type-CExternal discharge interface: Type-CPreset discharge stop voltage: 3V (not adjustable)Preset full stop voltage: 4.2V (not adjustable)Data storage: The measurement data is not saved, and the accumulated data is automatically cleared when the power is turned off or when the working mode is switched.Product size: 108×85×24mmProduct weight: 80g (net weight)Charge and discharge time reference:AUTO (automatic mode): The battery (discharged in advance) is charged ~ the default current is about 1A to discharge 1704mAh ~ it is fully charged again to trigger the program to stop, which takes 437 minutes and 23 seconds.DSG (discharge mode): When the battery is fully charged, it uses a current of about 1A to discharge 1681mAh, which takes 118 minutes and 55 seconds.CHG (Charging Mode): The capacity and energy are not measured during charging, only the time is recorded, which takes 164 minutes and 51 secondsPackage Included:1* 18650 battery capacity internal resistance detector automatic charging and discharging module































































































?width=960&height=1600&hash=2560,