5S 50A BMS Board 3.7V LiFePO4 Battery Protection Board with

Detailed Information About The Product:

The lithium battery protection board uses a highly integrated intelligent lithium battery protection board integrated chip, the performance is the protective board composed of discrete .
Can complete 3/4/5 string polymer lithium battery, ternary lithium battery, lithium iron phosphate, lithium cobalt oxide, lithium manganese oxide battery charge and discharge protection, over current, short circuit, over temperature protection and equalization function.
It adopts 4 milliohm ultra-low internal resistance MOS tube, which has low internal resistance and high efficiency. It is suitable for battery pack applications in different fields such as inverters, DC motors, power tools, and solar street lights. It is common to the same mouth and mouth, and has strong applicability. The protection board has a heat sink and a supply line.
Notes: select the appropriate protection board according to the actual battery type and series connection. The protection board of different series number can not be used universally. The protection board can switch the serial number of the battery by jumper. Notes: 1. the protection board is installed, the battery must be matched , and the and new batteries cannot be mixed.
2. remove the cable wiring, and connect all the wires, and then confirm that the wiring is plugging in the cable. When wiring, the control wiring is gradually connected from the negative pole of the battery. For the thick line, select the appropriate square wire according to the actual load current value.
3. When the working current is too , tin to the tinned part of the front and back of the protection board, or thicken the copper wire to increase the overcurrent capability of the circuit board. Otherwise, the copper on the circuit board will be led to the current due to excessive current. or burned.
4. need temperature protection function, you need to 10K NTC resistor refer to the description). The default is no temperature protection resistor.
5. This protection board has over-current protection secondary delay optional. If the load instantaneous starting current is and leads to -protection, you can select the secondary over-current protection delay to reduce the occurrence of protection.
Accessory Type: Battery Accessories
color:multicolor
Material:PCMetal Package Contents:
1 x BMS BoardLiFePO4 BMS) Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is /- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please dont be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !