5Pcs Metal Push Button Remote Control Transmitter ABCD/Lock Unlock 4 Button 433MHz Universal 4 Buttons Garage Door Opener Remote

5PCs fixed remote control 4 buttons 433MHz remote control controller universal repment for gate garage


5pcs 433MHz Remote Control Duplicator 4 Buttons Copy Clone Fixed Remote Control for Gate Garage Door Opener
Specification:
Product size: 55*30*15mm/2.17*1.18*0.59"
Working frequency: 433MHz
Remote control distance: 100m (in open environment)
Working method: copy type
Working voltage: DC 12V
Working current: 14mA
Working environment: -15℃~ 75℃
Application: for electric by remote control, retractable by remote control, garage by remote control, motor control remote control, curtain control remote control, car and motorcycle remote control, etc.

Operation method:
1. pairing (learning)
P the remote control and the copy remote control as close as possible, first press a button of the remote control, and immediately after the indicator light turns on, press and hold a button of the self-copy remote control for about three seconds, the LED will f 3 times and then quickly Fing, it means that the address of the remote control button has been learned successfully. The other keys are operated in the same way for learning.
2. Clear
Press the unlock button and the lock button at the same time for 2 seconds, the LED light starts to f 3 times. At this time, keep the lock button pressed, and release the unlock button. Press the unlock button three or four times within 5 seconds, and the indicator light fes quickly. The has been cleared.
Test whether the existing of the remote control has been successfully cleared: When you finish the clearing action, you can press any button of the copy remote control. If the LED does not f immediately at this time, it will f after 2 seconds, that means The of the copied remote control has been completely cleared. If the LED still fes quickly and immediately, the still exists and needs to be cleared again.
3. Restore the cleared
The copy remote control has a recovery function. If you accidentally clear the address of the normal copy remote control during use, you can press the start and mute buttons (the two buttons) on the remote control at the same time. After about three seconds, the LED will f 3 times. It starts to f quickly, which means that the cleared address is successfully restored.

Precautions:
1. Before using our remote control duplicator to copy, first clear the existing of your exisiting remote control.
2. The self-learing remote control duplicator cannot copy rolling s, such as HCS301.

Note:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
 
5 X Remote Control Duplicators 

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.