5pcs 433MHz e Control Electronic Gate Garage Door Opener e Control Duplicator Learning Code Cloning Code Car Key

Note:

This product can copy the e control with the following chip inside:

2260all manufacturers; 2262All manufacturers; PT2264, 5326All manufacturers;SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527All manufacturers; 1527All manufacturers; 2240All manufacturers;, part single chip microcomputer.

If you fail in copying with proper operation, you might have to chewhether your device has a chip above.

HCS chip and other chip can not be copied.

Wireless Communication :RF

Package weight : 0.040

Frequency:433 MHz

Package size-lengthcm:3

Package size- heightcm :7

Package size-width cm:2
Package:Yes 5 PCS e controls in one box.

Operation method:
1. Code pairing learning
P the e control and the copy e control as close as possible, first press a on of the e control, and immediately after the indicator light turns on, press and hold a on of the s-copy e control for about three seconds, the LED will f 3 times and then quickly Fing, it means that the aess code of the e control on has been learned successfully. The other keys are operated in the same way for learning.
2. Clear code
Press the "UP" on and the "DOWN" on at the same time for 2 seconds, the LED light starts to f quickly. The code has been cleared.
Test whether the existing code of the e control has been successfully cleared: When you finish the clearing action, you can press any on of the copy e control. If the LED only f once at this time, that means The code of the copied e control has been completely cleared. If the LED still fes quickly and immediately, the code still exists and needs to be cleared again.
3. Restore the cleared code
The copy e control has a recovery function. If you accidentally clear the aess code of the normal copy e control during use, you can press the next two ons on the e control at the same time. After about three seconds, the LED will f quickly, which means that the cleared aess code is successfully restored.

Precautions:
1. Before using our e control duplicator to copy, first clear the existing code of your exisiting e control.
2. The s-learing e control duplicator cannot copy rolling codes, such as HCS301.

Note:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.