433mhz Wireless Wide Voltage Coding Transmitter Decoding Receiver 4 Channel Output Module For 433 Mhz Remote Controls

433mhz Wireless Wide Voltage Coding Transmitter Decoding Receiver 4 Channel Output Module 433 Mhz Remote Controls

:

Product

Working voltage: DC3V-5V

Work current: 3mA

Sensitivity: -108dBM Rate: max 10 kb / s

Working mode: 7 modes such as point, self-locking, interlocking

Module output: 4 channels of CMOS level signal, can correspond to the remote control "ABCD" 4 buttons

Receive module can store remote control: 16

Specifications:

Features

1. The remote control uses a learning EV1527 encoding method. Each remote control has a stand-alone address code, prevents string code, interfering with each .

2. The receiving module has three function selection: point, self-locking, interlocking.

3. The receiving module uses a button selection mode. There is no need to perform mode selection welding, jumpers, etc., saving time labor costs.

4. The receiving module contains the decoding to support EV1527, PT2262 and coding s.

Instructions

Clearate:

Press 8 to learn the code button, the LED is off. LED flashes 8 times, clear OK. (The same remote control needs to rep the working mode, please clear the code and then learn)

6 seconds confiscation signal, automatically exit learning code mode

Learn code:

step :

According to the number of job modes required, press the learning button of the decoding module, and the LED lamp of the decoding module is lit.

Plock mode: Press 1 decoding module to learn buttons.

Self-lock mode: Press 2 Decoding Modules to learn buttons.

Interlocking mode: Press 3 Decoding Modules to learn buttons.

Step 2:

When the remote control is pressed, the decoding module receives the signal, the decoding module LED flashes three times, then goes out, the code is successful. (If you enter the learning code mode, no remote control signal, after 10 seconds, automatically exit learning code mode.)

Work mode introduction:

1. Press the learning button the 1st module, after the remote control is studied, enter the point mode;

2. Press 2 to the learning button the module, after the remote control is studied, enter the self-locking mode;

3. Press the learning button the 3 module, after the remote control is studied, enter the interlock mode;

4. Press the Learning button the module, after the remote control is studied,

Enter the two self-locking two way mode;

5. Press the learning button the 5th modu

Package Included:

1 * decoding module

Notes:

Precautions

1. Turn the power, you can clean code and symbol at any time. When the circuit performs the clerk function when working, the 4-way relay restores the normal state. When the log indicator is lit, the LED indicator is turned , and the learning wait time is about 16 seconds. It is necessary to complete the code within 16 seconds. After 16 seconds, the LED is turned off, and the program automatically exits the log.

2, when used in the first time, must make a clerification, clear the fac

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.