433MHz Wireless RF e Control Switch DC 12V 10A 1CH Relay Module Receiver ON OFF e Control For Led Lights DIY

Input Voltage: 12 V, RF working mode: rheterodyne

• Receiver sensitivity: > 97 dbm

• nsmitting distance:> 100 m open space

• De mode: MCU de

• e storage: 20

• Support e type: EV1527 learning code

• Working mode: Momentary, tole, latching time delay 5s ,10s ,15s

• Output terminal: NO , NC , COM

• e control battery: 2 x 3 V CR2016 on batteries

Note: Maximum input power is 250 V

Operating Function Description

1 Code learning operation

Inching learning code: After the controller is connected to the power, briefly press the learning code on the light fes once, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful learning code, and the working mode is inching mode.

S locking code learning: After the controller is connected to the power, briefly press the code learning on twice once the light fes, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful code learning, and the working mode is automatic mode.

Interlocking code learning: After the controller is connected to the power, briefly press the code learning on three times press once to f the light once, and then press and hold one on on the e control for 3 seconds such as key A. The controller indicator light fes and remains on, and then press another on on the e control such as key B. The controller indicator light fes to indicate successful code learning, and the working mode is interlocking mode such as AB interlocking.

Delay for 5 seconds to learn code: After the controller is connected to the power, briefly press the learn code on four times once the light fes, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 5 seconds.

Delay of 10 seconds for learning code: After the controller is connected to the power, briefly press the learn code on five times once the light fes, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful learning code, and the working mode is automatic shutdown mode with a delay of 10 seconds.

Delay for 15 seconds to learn code: After the controller is connected to the power, briefly press the learn code on six times once the light fes, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 15 seconds.

Delayed code learning by 20 seconds: After the controller is connected to the power, briefly press the code learning on seven times once the light fes, and then press the e control on for 3 seconds. The controller indicator light fes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 20 seconds.

2 Clear code operation

Press and hold the learn code on on the controller for 5 seconds until the indicator light fes, indicating successful code clearing.

3 Clear code operation

Jog mode: After learning the code for a single on on the e control, press the on relay to ene, and release the on relay to disconnect.

S locking mode: After learning the code for a single on on the e control, press the on relay once to ene and then press the on relay again to disconnect.

Interlomode: After learning the codes for the two ons on the e control, press the A key to activate the relay, and press the B key to deactivate the relay.

Delay mode: After learning the code for a single on on the e control, press the on relay to ene, and after the delay, it will automatically disconnect.