433mhz Wireless RF e Control DC 3.6V 5V 9V 12V 24V 1CH Mini Relay Switch LED Lamp Controller Micro Receiver nsmitter DIY

Application environment:

e control switch,motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, e control socket, e control LED, e audio e control electric doors, garage door e control, e control rectable doors, e volume gate, pan doors, e control door opener, door closing device control system, e control curtains, alarm host, alarm, e control motorcycle e control electric cars, e control MP3.

Features:

*Wireless control LED lamp string, mas tree light string, light control switch.

*range working voltage.

*Ul low power,High sensitive response.

Specifications Of The Receiver:

Working Voltage: DC 3.6V~24V.

Maximum Load: 2A.

Static Current: 3.6 mA ~ 5.5mA.

Working Frequency: 433MHz.

Reception Sensitivity: ≥ -107dBm.

Modulation Mode:ASK rheterodyne.

Number Of Stored e Controls: ≤ 10.

Working Mode: Momentary, Tole, Latching Mode.

Learnin: Learning on.

Working Temperature: -20 degrees 80 degrees.

Appearance Size: 26mmx 13mm x 1mm length × width × high.

Specifications Of The Receiver:

Operating RF Frequency: 433MHz.

Coded System: 1527 Learning Code.

Working Voltage: DC 6V.

Working Current: 12mA.

nsmitting Power: 10mW.

Wireless Operating Distance: 50mFree Space.

nsmission Rate: 50 ~ 60KHz.

Frequency Deviation: ±0.2MHz.

Color: Black.

Battery:2*CR2016

Wiring Diagram

  

Operating Mode

You can match the nsmitter with the Relay Receiver Module  in 3 modes.

Momentary Mode:

1. Press and hold one on, relay will turn on;

2. Release the on, this relay will turn off.

Tole Mode:
1. Press on "A", relay will turn on;

2. Press on "A" again, this relay will turn off.

Latched mode:

1. Press on "A", relay will turn on;

2. Press on "B", this relay will turn off.

Delete the existing data about operating modes

Press the learning on on the Receiver 8 times. The existing data will be deleted succeed.

Note:

1. When you receive our products, it may set in one e mode randomly, that because each product was d before it can be arranged to shipment. So, please delete the existing data to first use.

2. After deleted the data, all the e controls cannot work any more.

Set up

Set upMomentary

1. Press the learning onon the Receiver once. Wait for 3 seconds;

2. Press one on on the e control. Wait for 3 seconds. Succeed.

Set upTole

1. Press the learning onon the Receiver twice. Wait for 3 seconds;


2. Press one on on the e control. Wait for 3 seconds. Succeed.

Set upLatched

1. Press the learning onon the Receiver third times. Wait for 3 seconds;

2. Press on "A" on the e control. Wait for 3 seconds.

3. Press on "B" on the e control. Wait for 3 seconds. Succeed.

*If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!*

*We have our own factory.Please let us know if you have some OEM projects.We are willing to get a cooperation with you.*

 

 

window.adminAccountId=248897215;