433Mhz Universal Wireless Remote Switch DC12V 4CH Relay Receiver Module And 5 Pieces RF Control 433 Mhz Transmitter-KR1204-4 And 2RC

433 Mhz Universal Wirele Remote Switch DC12V 4CH relay Receiver Module and 5 pieces 4 channel RF Remote 433 Mhz Transmitter

Order Package Include:(4 order model can be chosen)

Order Model 1:

1Piece KR1204-4 and 5 Remote Controls

Details:

Receiver Switch Module (KR1204-4): 1 Piece with Plastic Shell

Remote Control: 5 Pieces with Battery

Order Model 2:

1Piece KR1204-4 and 3 Remote Controls

Details:

Receiver Switch Module (KR1204-4): 1 Piece with Plastic Shell

Remote Control: 3 Pieces with Battery

Order Model 3:

1Piece KR1204-4 and 2 Remote Controls

Details:

Receiver Switch Module (KR1204-4): 1 Piece with Plastic Shell

Remote Control: 2 Pieces with Battery

Order Model 4:

1Piece KR1204-4 and 1 Remote Controls

Details:

Receiver Switch Module (KR1204-4): 1 Piece with Plastic Shell

Remote Control: 1 Piece with Battery

The way of Circuit Connection:

Please Note: the Receiver Switch Module part number KR1204-4 have 3 ways of working mode.The OUTPUT signal have 2 Voltage Level. It decided by the IMPUT of the COM pin. OUTPUT mode 1: Connect the COM to the Power Supply by DC12V, the Output pin will create DC12V Signal. Please check below diagram for better understanding.
OUTPUT mode 2 : Connect the COM pin with any other Additional Power Supply,the output will create the same Voltage signal as the Additional Power Supply. it can be Direct Current or Alternating Current.  Decided by the Additional Power Supply.

BUT, Please note: the additional Power Supply should be in the range of the Receiver Switch Module- (DC5-12V, AC 85-240V) .

Please check below diagram for better understanding.

OUTPUT mode 3:

Mix work mode: You can also make 2 channel work under the DC output mode, and 2 with the AC output. Please check below diagram for better understanding.
Product Photo:

Note: if you would to select different  quantity Remote Controls or Receiver Switch Module, please click below picture for what you need:

ANT INFORMATIONS:

You can match the Remote Control with the Receiver SwitchModule (KR1204-4) in 3 mode.

Remote mode 1: Momentary/Jog

Pre and hold one key->ON; Release the key->OFF

Details:

Hold one key , the corresponding channel is working /ON;Then Release  your finger the channel turns to stop/OFF .

Remote Mode 2: Tole/Self-Lock

Pre one Key->ON; Pre the same key again->OFF

Details:

Pre one key once , the corresponding channel turn  working/ON;

Pre the same key once again the same channel turn to stop/OFF .

Remote Mode 3: Latched/Inter-Lock

Pre one Key once->ON; Pre another key once->OFF

Details:

Pre one key once( take A key for example), the corresponding channel (like channel 1) turn to working/ON;

Pre another key once(take B key for example), the same channel turn to stop/OFF. At the same time, another corresponding channel(like channel 2) turn to working / ON .

How to set the remote mode:

Please find the Learning Key of the Receiver Switch Module by checking below photo:

Note: When you receive the product, it maybe set in one remote mode ly, that because each product got test when it can be arranged to shipment.So, if you want to select the remote mode you like, please Delete the existing data for the first step:

How to Delete the existing remote controls data?

Pre the learning key on the Receiver Switch Module board 8 times , then wait for the LED indicator on the board  flash for 7 times, the existing data are deleted succefully. ( if the LED indicator on the board doesn't Flash, Please check the Power Supply status, make it right, and try more times)

How to Set the Remote Mode:

1-Momentary/Jog Mode:

Pre the learning key on the Receiver Switch Module board once , The ON-board Led indicator will Flash simultaneously .Then pre any of the remote key (Or which one your want to use) , the on-board LED indicator will flash 3 times to inform that the setting of momentary mode is succeful .

2-Tole/Self-Lock:

Pre the learning key on the Receiver Switch Module board 2 times. The ON-board Led indicator will Flash simultaneously . Then pre any of the remote key (Or which one your want to use) , the on-board LED indicator will flash 3 times to inform that the setting of tole mode is succeful .

3-Latched/Inter-Lock:

Pre the learning key on the Receiver Switch Module board 3 times. The ON-board Led indicator will Flash simultaneously .

Then pre first remote key (Like Key A), then pre the  a second Key (Like Key B), the on-board LED indicator will flash 3 times to inform that the setting of latched mode succeful . The first preed key stands for on(Like Key A ), and the second preed Key stands for off (Like Key B).

4-2Channels Momentary/Jog + 2Channels Tole/Self-Lock:

Pre the learning key on the Receiver Switch Module board 4 times. The ON-board Led indicator will Flash simultaneously .

Then pre any of the remote on, the on-board LED indicator will flash 3 times to inform that the setting of this mode is succeful

5-2Channels Momentary/Jog + 2Channels Latched/Inter-Lock:

Pre the learning key on the Receiver Switch Module board 5 times. The ON-board Led indicator will Flash simultaneously .

Then pre any of the remote on, the on-board LED indicator will flash 3 times to inform that the setting of this mode is succeful.

6-2Channels Tole/Self-Lock + 2Channels Latched/Inter-Lock:

Pre the learning key on the Receiver Switch Module board 6 times. The ON-board Led indicator will Flash simultaneously .

Then pre any of the remote on, the on-board LED indicator will flash 3 times to inform that the setting of this mode is succeful

7-2Channels Latching + 2Channels Latched:

Pre the learning key on the Receiver Switch Module board 7 times. The ON-board Led indicator will Flash simultaneously .

Then pre any of the remote on, the on-board LED indicator will flash 3 times to inform that the setting of this mode is succeful.

Product SPECIFICATION:

Electronics Character:

1. Working Voltage: DC12V

2. Output voltage: Decided By the COM PIN INPUT

3. Code:EV1527

4. Loop current limit:5A

5.Quiescent Current: 5mA

6. Working Frequency: 433Mhz

7. Receiving Sensitivity: -104dBm

8. Function option: Momentary/Tole/Latched

9. Modulation Mode: ASK

10. Matching Mode: Intelligent Learning code

Pin functions:

+V :Positive pole input

GND :Negative pole input

1. KC1 Normal Closed of relay     (NC)

2. KC1 Common of relay              (COM)

3. KC1 Normal Open of relay       (NO)

4. KC3 Normal Closed of relay      (NC)

5. KC3 Common of relay               (COM)

6. KC3 Normal Open of relay        (NO)

7. KC2 Normal Closed of relay       (NC)

8.  KC2 Common of relay                (COM)

9. KC2 Normal Open of relay         (NO)

10. KC4 Normal Closed of relay      (NC)

11. KC4 Common of relay               (COM)

12. KC4 Normal Open of relay        (NO)

Buyers show:

ANT INFORMATIONS For Buyers:

1. For the 5 stars Comments:

Dear Customer, you are welcome to Angry Monkey!!If you feel very satisfied when you received your product, please give us 5 stars good comments. it can encourage us to provide better service to you.

Please follow the guide to do so:

Unfortunately, in the case you don't feel satisfied, please feel free to contact with us. We will try our best to make you satisfy. BUT, please DO NOT give us bad comments before you let us know what can we do? The Bad comments CAN NOT be modified. Even we make you satisfy finally.

2. Special Note: Any problem, please contact our customer service, we will do our best to help you. The dispute can notsolve the problem, it only lead to everyone's unfriendly. So we suest that: PLEASE contact us before making any disputes.

Matters need attention:

Safety considerations:

1. Please Make sure all wires are connected properly, before turn on the power supply, or it may cause damage to the product.

2. Be sure to place it where children can not touch it.

3. Make sure that the work envment is out of contact with water,  wet and dusty. It should be placed in an envment suitable for electronic products. Regular maintenance is neceary.

4. When it comes to the use of alternating current with high voltage and high current, the installation and debuing must pay attention to personal safety or seek profeional electrician's help, otherwise it will cause significant personal injury.

Service information:

1. Logistics proceing:

Orders will be shipped within 7 days ar the payment, if you find the goods are not arrange to the shipment more than 7 days ,please contact the customer service staff.

2. Packing standard:

Packaging photos:

3. Return rule:

Non quty probl will not be adjusted or . Please check product information carefully before placing an order to avoid unneceary lo.When the product quty probl occur, please consult the customer service for more details first.

If you need DC 12V power supply to test, please click below picture to buy:

About shipping

Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 




Special Announcement:

Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .




Your 100% satisfaction is very ant to us

If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.