Wireless Remote Control DC 12V 1CH Relay Receiver Module 433 Mhz Remote Control Switch RF Transmitter Electronic Lock Control
Feature
? Input Voltage: 12 V, RF working mode: Superheterodyne
? Receiver sensitivity: > 97 dbm
? Transmitting distance:> 100 m ( open space)
? Decoding mode: MCU software decoding
? Remote storage: 20
? Support remote type: EV1527 learning code
? Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s )
? Output terminal: NO , NC , COM
? Dimension of PCB:35 x 30 x 18 mm (L,W,H)
? Remote control battery: 2 x 3 V CR2016 button batteries
Note: Maximum input power is 250 V
Operation introduction
Clear code:
Press and hold the receiver learning button for 8 seconds, and the indicator light will return from off to on, indicating that the control code is cleared successfully.
Jog mode:
Press the learn button of the receiver once, and then press the button of the remote control. The receiver indicator flashes continuously for several times to indicate that the pairing is successful.
Self locking mode:
Press the learn button of the receiver twice, and then press the button of the remote control. The receiver indicator flashes continuously for several times to indicate that the pairing is successful.
Interlock mode:
Press the learn button of the receiver three times, then press the A button of the remote control. The indicator light flashes and remains on. Press the B button again, and the receiver indicator light flashes continuously several times to indicate successful pairing.
5 second delay mode:
Press the learn button of the receiver 4 times, and then press the button of the remote control. The receiver indicator flashes continuously for several times to indicate that the pairing is successful
10 second delay mode:
Press the learn button of the receiver five times, and then press the button of the remote control. The receiver indicator flashes continuously for several times to indicate that the pairing is successful
15 second delay mode:
Press the learn button of the receiver 6 times, and then press the button of the remote control. The receiver indicator flashes continuously for several times to indicate that the pairing is successful
Package included
Remote control*1