433Mhz RF 220V Electric Doorcurtainshutters Limit Wireless Radio Remote Control Switch For Forward And Reverse MotorsA

85V 110V 220V 10A 2CH Motor Remote Control Switch Motor Forwards Reverse Up Down Stop Door Window Curtain Wirele TX RX Limited Switch 1. Working Voltage: AC 85V-250V 2. Working Frequency: 433Mhz (if you need 315mhz leave meage please) 3. Receiving sensitivity: -105dBM 4. Max Load: 10A Relay ( have better load le than 5A) 5. PCB Size:75*58*15mm  Case Size :95*62*29mm 6. Function: Limit & Wire External on 7.  State OFF, (Suddenly, the electricity was cut off, then comes again, the State still is OFF, you need manual turn it ON) 8.  Out State: Momentary Latched Adjusted by the Jumper on the Receiver, ( we ship default as Latched, if you need use Momentary to change the Jumper on the Receiver ,Notice, please don’t use Tole) 9.  Momentary----------Jumper on 1 Pin 10. Latched----------- Jumper on “L&S” 11.   Momentary ------------- Pre on"Up", the Motor Forward, Release is Stop. Pre on "Down", the Motor Reverse, Release is Stop. Latched---------------- Pre on "Up", the Motor Forward, Pre on "Stop" is stop. Pre on "Down", the Motor Reverse, Pre on "Stop" is stop 12. When the relay is activated, the buzzer synchronize with a “beep” prompt. 13. When the receiver output state is “Latched”, we have set it 0.5s time delay for forwards and reverse, it is the Protection function. 14. We have made transmitter and receiver working together and test it before ship it,when you get it don't need to do anything ,just install it. 15.  Learning Code : (1) Pre the learning on for 1 time,the learning indicator flashes slowly,Then pre the transmitter on up (first on default for forward) ,the learning indicator flash 5 times and OFF,It mean the first on learning Succefully (2) Pre the learning on for 2 times,the learning indicator flashes slowly,Then pre the transmitter on down (second on default for forward) ,the learning indicator flash 5 times and OFF,It mean the second on learning Succefully (Third on default for stop ,When the jumper set for Latched) 16. Clear code : Pre the learning on on the receiver for 5s,the learning indicator will flash 3 times and OFF , It mean all the transmitter code in the receiver have been cleared. Note:433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency pacote inclued :

A:

1 x Receiver(with cover)

1x Transmitter(with battery)

B:

1 x Receiver(with cover)

2x Transmitter(with battery)

C:

1 x Receiver(with cover)

3x Transmitter(with battery)

D:

1 x Receiver(with cover)

4x Transmitter(with battery)

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.