433MHz e Control Wireless 4 Keys Copy e Control Cloning Garage Door e Control Duplicator Key

New 433MHz e Control Wirele 4 Keys Copy e Control Cloning Garage Door e Control Duplicator Key

Description:1. Clear code: two fingers at the same time hold the unlokey and lokey; the LED light rapidly fes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly clithree times on the loose on until the LED light fes quickly; the two fingers can release; then pre any one key of the e control; when LED light goes off, it means clear code is succeful(four keys all empty); if after you pre any on of the e control, the light is still on, it indicates that the code has not been cleared succefully. You need to re-clear, and only succefully clearing the code can cloning be succeful. You can repeatedly clear and clone the code.2. Copy: left hand taking the e control, right hand taking our cloned e control and keep two e control as close as poible; pre the first keys of two e controls at the same time; in about 2 seconds, the LED light will f quickly 2 times; after one second, the indicator light keeps fing and let go of your fingers; and then pre the key after succeful study, the light keeps on, which means that the first key code on e control has been copied to the other e control; the same method can be used in turn on the second key, the third key... If the copy is succeful, the e control function is the same as the matching e control.3. Restore: When you accidentally clear the copy of the e control code, you can simultaneously pre the copy of the e control of the bottom two keys, LED lights will f quickly, let go after preing any key, light , this Indicating that the code for the e control is restored. Before using our copy e control, please be sure to remove the existing code from the e control.How to deal with the situation where some of the keys can control, the rest cannot controlYou can use clear and restore operation, the specific operation is as follows:1. Clear code;2. After clearing code, copy the unsucceful key again, and there is no need to copy the rest ons;3. Clear the code again;4. Restore code; at this time, the keys that were not succefully copied are now covered by new codes, and the keys that were succefully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are succefully copied.Features:Better range, more ble and er lasting battery life.With LED nsmitting & low battery indicator, for visual feedbaand working mode indication.Comes with a buckle for easy carrying.Application: Vehicle cenl locking syst, garage doors, electronic doors, car sunroofs, heating syst, etc.e Control only, other acceories demo in the picture are not included!Tips:1. Select the e control of the prerequisite: the e control function is normal, e control is the same or compatible, e control operating frequency the same.2. The e control can only copy the fixed code, learn the code and part of the single- e control (can copy the model see copyable type).3. Two-way e control, rolling code e control, single- program e control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on.4. Before copying the e control, e sure that the existing code on the e control has been cleared and chethat the code is cleared succefully. Otherwise, it cannot be copied.5. Please ensure that your e control has enough power, the distance between the two e control the better.6. If the copy distance is too close to the switch at different angles to copy. Pre and hold the on on the e control to send the signal completely normal, and then pre the on on the e control to ensure that the function is completely copied.Specification:Type: e Control: 4Frequency: 433MHzRated Voltage: 12VRated Current: 10mAPackage includes:1 x e Control