DIY Wireless Switch DC 12V 1CH Mini Relay Module and 433MHz RF nsmitter e Control for Garage Curtain Home Appliance

Input Voltage: 12 V, RF working mode: rheterodyne

• Receiver sensitivity: > 97 dbm

• nsmitting distance:> 100 m open space

• De mode: MCU de

• e storage: 20

• Support e type: EV1527 learning code

• Working mode: Momentary, tole, latching time delay 5s ,10s ,15s

• Output terminal: NO , NC , COM

• e control battery: 2 x 3 V CR2016 on batteries

Note: Maximum input power is 250 V

Control Mode:

1. S-LoMode: Press->On; Press again->Off Need 1 switch and 1 e control on.

Press one on for working/ ON. Press the same on again for stopping/ OFF.

2. Inter-LoMode: Press->On; Press other on->Off Need 1 switch and 2 e control ons.

Press one on for working/ ON, press another on for stopping/ OFF.

3. Jog Mode: Press and hold->On; Release->Off Need 1 switch and 1 e control on.

Keep pressing one on for working/ ON. Remove your finger for stopping/ OFF.