433Mhz DC 12V Motor Drive Forwards and Reverse Controller Module Switch RF Wireles Controllers Remote Electric Push Rod Motor

Introduction: This DC 3V~18V miniature motor control module is specially designed for the motor, and controls the forward rotation, reverse rotation and stop of the motor through the transmitter. Commonly used in automobiles, electric curtains, water pumps, garage doors, rolling shutter doors, etc. (DC only).

Mini Size: Can be easily installed in limited spaces such as canopies, junction boxes, electrical boxes, etc. The size of the receiver is 32.2*12.8*3mm.

Strong Signal: Using RF technology, this remote switch can penetrate walls, floors and doors anywhere within a reliable distance to control the receiver. Maximum range is up to 164 feet.

Easy to wire: With wire design, you can directly connect the positive and negative poles of the power supply and the motor.

Power saving mode: The default standby current is 6mA. By setting the power saving mode, the standby current can be reduced to 1mA.




433MHZ DC3V~18V small motor forward and reverse wireless radio frequency remote control switch

Application environment:

Remote control switch,motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.

Feature:

*Wireless control motor forward and reverse.

*Long distance up to 50 meters.(Open area can reach 100 meters)

*Ultra low power consumption 1mA, high sensitivity response.

Module parameters

Brand name



QIACHIP




Working voltage



DC 3V-18V




Load current



2 A




Standby current



5-6mA (without power saving mode)




Working current



(mainly depends on the current size of the load) generally 200-300mA




Load power



24W, ideal maximum current 2A (long-term safe work: below 1A, 10-20W)




Working Mode



Momentary,Toggle,Latched,Power Saving Modes




Storage Quantity



12 groups of functions can be memorized




Dimensions



32.2 × 12.8 × 3.1 mm




Application recommendation



Remote control gate valve, remote control toy car, remote control curtain, etc.




Scope of application



Small motors, motor drives.




Recommended motor



Geared motor




receiving frequency



433.920MHZ

Momentary Mode Pairing Instructions

Momentary mode: press and hold the A button of the remote control, the motor rotates forward, release to stop, press and hold the B button of the

remote control, the motor reverses, release to stop.

Setting: press the learning button once, the indicator light is always on,enter the pairing mode, press the A button of the remote control, the

indicator light flashes and then keep on, then press the B button of the remote control, the indicator light flashes and then goes out, and exits the

pairing mode.

Toggle Mode Pairing Instructions

Toggle mode: press the A button of the remote control, the motor rotates forward, press the A button again, the motor stops, press the B button of

the remote control, the motor reverses, press the B button again, the motor stops.

Setting method: press the learning button twice, the indicator light is always on, enter the pairing mode, press the A button of the remote control, the

indicator light flashes and then light up, then press the B button of the remote control, the indicator light flashes and then goes out, exit the pairing

model.

Latching Mode Pairing Instructions

Latching mode: press the A button of the remote control, the motor rotates forward, press the B button of the remote control, the motor reverses, press the C button of the remote control, the motor stops .

Setting: press the learning button three times, the indicator light is always on, enter the pairing mode, press the A button of the remote, the indicator

light flashes and then lights up, then press the B button of the remote, the indicator light flashes and then lights up, and finally press the C button of

the remote, the indicator light turns off after flashing, and exits the pairing mode.

Clean code

Press the learning button 8 times, the indicator light will turn off after flashing, and the module will clear the paired remote key value.

Power save mode

Description: the quiescent current is reduced from 6mA to 1mA, but it needs to press and hold the remote control for a long time to wake up the module.

Setting: press the learning button 4 times, the indicator light flashes and then goes out, the module enters the power saving mode; press the

learning button 5 times, the indicator light flashes and then goes out, the module exits the power saving mode