433MHz Copy Remote Control Wireless RF 433.92MHz Clone Remote Control for Electric Garage Door Opener Controller Duplicator

1.s could be copied

2260(all manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101, HCS200/HCS201(part ),HCS300/HCS301, part single microcomputer....

2. cleaning method:

Press the unlock button and lock button at the same time(some shells are the up button and down button), after the LED indicator light fes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast fing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press

3. Copy method

One hand keeps the remote controller, while another keeps the copy remote control, the two remote controls should be pd as closely as possible (the ideal situation is to put the two remote controls on the desktop side side with zero distance), respectively press down the copy button, when the LED indicator light fes quickly after three fes, this copy is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the remote control should be pd back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.