433MHz Copy Remote Control 4 Keys RF Wireless C Cloning Rolling Fixed Auto Duplicator For Car Garage Door Opener

Remarks:
For fixed &learning remote controls, the duplicator will work after duplicating.
But for the rolling brand listed above, please follow the manual to program the duplicator to receiver after duplicating

Here is the way of copy
Memory clearance
1.Press button 1 and 2 simultaneous until LED fes 3 times
2. Release button 2 (Keep pressing button 1), and press button 2 slowly for 3 times, LED fes quickly.
3. Release both button, the duplicator is ready for copying

Duplicating
Put duplicator aside of transmitter, as close as possible.

Fixed remote control:
Press and hold button 1 of transmitter, then press and hold button 1 of duplicator until you see the duplicator's LED fes means the duplicating succeed.
Repeat above step to the rest buttons. The duplicator will work after duplicating.

Rolling remote control:
Press and hold button 1 of transmitter, then press and hold button 1 of duplicator until you see the duplicator's LED fes means the duplicating succeed.
Once 1 button duplicated, the rest buttons will generate automatically, please follow receiver manual to insert the new duplicator on the receiver.

If you erase the mistake, you can resume it pressing and hold both of the ''3'' and ''4'' button on the remote controllers at the same time, after 10 seconds, the LED fes 2 times and turn off which indicates the of the copy remote controller is resumed.

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.