433mhz Car e Control Key Smart Electric Garage Door Repment Cloning Cloner Copy e 4 Channe

Summary
The ICANING K2210043 Ford 4-key copy e controller uses the SA901B main control chip, which supports online prograng, can be repeatedly ed and written, and has built-in . It can copy other ordinary same-frequency e controllers. It can be easily and quickly used, and can be used in fields such as car e control, lighting control, and smart home e control.

Product characteristics
1 Operating frequency: 315 MHz/433.92 MHz;
2 Battery type: 3V on battery 2032 * 1;
3 Working method: copy;
4 Shell material: ABS;
5 Product size: 75.5 * 34.5 * 20.6mm 
6 Net weight of the product: 37.7g 

Function Description
1 Copy Code Matching Operation
If the e control has checked the code, it is necessary to clear the code before checking the code. Code matching operation: Press a single on on the copied e control and the copy e control at the same time, until the copy e control indicator light fes from fast to constant, then release the two e control ons, and code matching is successful. The other keys are also operated in this manner until all the keys are copied.
2 Clear code operation
Press and hold the copy e control loand car ons simultaneously until the indicator light fes quickly, and then briefly press the loon three times to clear the code during this process, the car on is kept pressed and held.
3 Recovery Code Operation
Press and hold both the unloand ring ons on the copy e control until the indicator light fes quickly, and the previously cleared e control code can be restored.

 Cheyour device Frequency and IC chip model before buyingMust be meet the following three conditions:1.You must have a good e controller.Or will copy the bad command, can& x27;t work2.You need to know the device frequency and IC chip model of your current e controller.3.This e controller is mainly suitable for rolling door, rectable door, Road gate, etc. If your door is a re door, you & x27;d better confirm it with our customer service before purchasing. For example: open your e controller and chedevice frequency 433, IC chip model is 2264, and you also have a usable e controller, will be ok to choose this product.  Compatible IC chip:2260as,PT2260,SC2260,HS2260 LX2260,HX2260; 2262as,PT2262,SC2262,LX2262,HS2262,HX2262, PT2264,PT2240LX2240 LX2241 SCL2240,CS5211,1527 EV1527,HS1527,HX1527 SC1527 GP1527 CP1527 AD1527 SCL1527 TL1527 ZX1527,SMC918,AX5026,SMC926,AX5326-3,AX5326-4, FP527,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F630 ULN2003, etc. RF frequency type: 315/868/433 Listing product only support 433.92 MHZDuplicate Your Existing e Controllers so you always have a backup: 1.Vehicle cenl locking syst   2. Garage doors   3. Electronic gates   4. Electrical appliances/Home automation i.e. lights 5. Car sunroofs   6. Car/Motorbike al  Operating Current: ≤12mAOperating frequency: 433.92Mhznsmitting power: ≥10mWnsmission Distance: 50 meters openFrequency deviation: ± 0.2MHznsfer rate: 50--60KHZWorking temperature: -20~70CelsiusStorage temperature: -10~ 50CelsiusHumidity: 85% or less

How to use the e control
1. Code clearing method:

At the same time, press and hold the two keys of unloand unlosome shells have two keys of up and down, and the LED indicator enters the fast fing state. At this time, all the data in the memory is cleared. After clearing the data, the e control will not light up no matter which key is pressed.



2. Copy method:

One hand holds the e control and the other hand holds the copy e control. The two e controls should be as close as possible. Press the keys required for the copy respectively, and the LED indicator will f quickly after fing. The copy is successful. The other key operation methods are the same. Some e controls have low nsmission power, so the e control and the copy e control should be operated bato bato e the copy. If there is interference in some operating environments, the interference operation should be avoided. If the copy is not easy to use, the copy should be repeated after the code is cleared. Especially ant: the e control on your hand must work normally and have the same frequency as our e control