Why choose this product:①. This is a multi-frequency ting e control that can te 300MHz~915MHz e controls.
②. 2-in-1 e control, when you have stored 4 signals, you can press and hold the "B" and "C" ons at the same time, which will switch to another e control and you can store 4 new signals
③. If you don& x27; t know whether your e control can be copied, you can consult us. We will reply in time after seeing the information.
④. e controls that can copy most learning codes and fixed codes the specific range is introduced below.
⑤.Many brands can be copied, such as DOORHAN/NICE/CAME/BFT/FAAC······see below for specific models.
Supports copying multe types of e controls:Dear customer, If your e control is a fixed code e control or a learning code e control,
please e sure your e control meets the following conditions:
1 . The e control is good and can be used normally.
2 . The frequency is
300MHz~915MHz .
3 . The
chip code is one of the following codes:
★ 1527 all models, 2260 all models, 2262 all models, 527 all models, 2240 all models. For example: EV1527, SC2262, HS2262.......
★ SMC5326, SMC918, SMC926, SM5028S, SC5262, SCL2240, PT2240, PT2264..
★ HT12E, HT12D, HT600, HT680, HT6207, HT6010, HT6012, HT6014, HT6P20B, HT6P20D, HT46F49E..
★ LX2240, LX2241..
★ AX5026, AX5326-3, AX5326-4..
★ P527, PIC16F630★★★ In addition, it also supports copying the models of well-known brands in the picture below: How to determine the frequency and chip code of your e control:For example: If 433 is found, the frequency is 433Mhz. If 1527 can be found, then it matches the range of chip codes. Then this e control can be copied by our e control.
4-on design●The 4-on design is suitable for e controls with multe types of functions. Each on can be individually copied to the corresponding on function of the e control.Products can be used in homes, f, factories, offices, laboratories, rmarkets and so on.
e controarage door \ Electric door \ house door \ shutter door \ expansion door \ gate door \ road gate
e control Electric curtain \ Water \ Fan \ Lamp \ LED light \ \ ventilation device \ Signal nsmission
e control motor positive and negative rotation \ motor switch \ DIY
2-in-1 multi-frequency copy e control●If you have 315mhz and 433mhz , but it is very troublesome to carry multe , at this time, you can use our to copy all your at the same time, and you can use one e to control all your devices.
●Our e control can be compatible with multe frequencies at the same time, Our e control is compatible with multe frequencies at the same time, no need to worry,
●Each individual e control on can be independently paired with a frequency. no need to worry
●Although our e has only four ons, it can store
8 signalsIn the blue light mode, it can be regarded as the e control"1", and in the green light mode, it can be regarded as the e control"2", the two modes are independent of each other, and there is no mutual interference
The two modes can be switched at will by pressing and holding the "B" and "C" ons simultaneously for about three seconds.
sRF frequency : 300~915MHz
Product Type: Copying/Duplicating e Control nsmitter.
Match Code Way: Copying while attached to another e control One to One Copying.
Supported: 2-in-1 e control ,4*2 .
En Type: Learning Code Example: 1527, Fixed Code Example: 2262.Rolling code some brands and models
Modulation System: ASK.
Operating Current: