433MHz 110V 220V Universal Wireless Remote Control

433MHz 110V 220V Universal Wireless Remote Control Switch,2CH Relay Module and 500m Transmitter for Light/Garage Gate/Crane/DIY

• I am an international seller，100% brand new and of high quality

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.Support APP : NoFrequency : 433 MHzChannel : 2Package : YesModel Number : 2202+PT2262Wireless Communication : RFUse : Universal,Lighting,Electric Door,Automated curtains,SWITCHBrand Name : WenQiaOrigin : Mainland ChinaCertification : CE,FCC,RoHSWorking Voltage : AC 85V 220V 60HZ/50HZMax Current : 10 AmpShell : includedItem Type : 433Mhz remote controlMatching Mode : Momentary /Toggle/Latched ModeModulation Mod : ASKe : Intelligent Learning e 1527Application scenarios : home,garden, Farm, Factory, Office, Supermarkets restaurant and so onWorking temperature : -30 ~ +80℃Feature1: : Projection curtain controlFeature2: : Curtain controlFeature3: : Garage door controlFeature4: : Electric drive gate controlFeature5: : Light controlRemote control Size : 90*40*14mmRemote control control Range : up to 500m (theoretical distance)Signal : The signal is stable and can pass through wallsNOTE:
Dear customer, our options are equipped with 1~2 remote controls. If you need more remote controls, please contact us, thank you.
433MHz 110V 220V Universal Wireless Remote Control Switch,2CH Relay Module and 500m Transmitter for Light/Garage Gate/Crane/DIY
 
Product application areas
●Products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc.
●Remote control garage door\electric door\house door\rolling door\telescopic door\gate\barrier gate
●Remote control electric curtains\water pumps\fans\desk lamps\LED lights\bulbs\ventilation devices\signal transmission
●Remote control motor forward and reverse\motor switch\DIYExamples of application scenarios:
for remote control lights
for remote controlled garage doors
 
The signal is stable and can pass through walls, and the pairing is flexible. The remote control distance can reach 500meters (in an open area). One receiver can be paired with up to 25 remote controls.Relay Receiver Board Parameter
Working voltage  :  AC 85V~250V
Input vlotage  :  1~250V
Output vlotage  :  1~250V
Quiescent Current  :  97dbm
Amount of storage remote controls  :  20 pieces
Support ening  :  1527 Learning e /2262 fixed e
RF Operating mode  :  ASK superheterodyne wireless reception
Receiving range  :  Open space is more than 50 meters
Remote operating mode   :Momentary Mode/Toggle Mode / Latched ModeL(Live wire): Input 85V - 250V Live wire
N(Neutral wire):Input 85V - 250V Neutral wire
NC:Normally closed pin
COM:Common pin
NO:Normally open pin
 Remote controller Parameter 
RF frequency : 433MHz
Control Distance : 500 meters in open space
Material : Plastic
Support ening : 1527 Leaning e
Battery  : 23A 12V (included)
Size:90*40*14mm
Base: included
 
Wiring diagram 
If you have any questions, please contact us, we will try our best to answer, thank you.Operation Mode●Momentary Mode:
1. Press and hold one button, relay "1" will turn on;
2. Release the button, this relay "1" will turn off.●Toggle Mode:
1. Press "A" key, relay "1" will turn on;
2. Press "A" key again, this relay "1" will turn off.●Latched mode(This mode requires a remote control with at least 3 buttons or more):
1.Press "▲" key, relay "1" will turn on;
2.Press "▼" key, relay "2" will turn on, at the same time relay "1" will turn off.
3.Press "■" key, Both relays "1" and "2" will turn off.How to set up
1.Memontary Mode: Press learning button on the switch 1 time,press any remote button 1 time,succeed
2.Toggle Mode: Press learning button on the switch 2 times,press any remote button 1 time,succeed
3.Latched mode: Press learning button on the switch 3 times,press ▲ button 1 time,press ▼ button 1 time,succeedReset
1.Press learning button 8 times to clean data,then all remotes can not control this receiverNotice:
1. Reset before you want to change the operating mode of one remote control.
2. After reset, all the remote controls can not work anymore.
3. Replace the battery in time when the remote control voltage is low. To get the stronger signal transmission.
4. Slightly stretch the antenna on the receiver for better signal reception.
5. The remote control need to have at less 3 or more buttons if you want to set up latched mode.------------------------------------------------------------------------------------------------------------------------------
Please contact with us if you have any questions.Thank you. 
 
 














?width=1000&height=1000&hash=2000,


?width=1000&height=1000&hash=2000,


?width=1000&height=1000&hash=2000,


?width=1000&height=1000&hash=2000,


?width=1000&height=1000&hash=2000,


?width=1000&height=1000&hash=2000,


?width=1000&height=1000&hash=2000,


?width=1000&height=1000&hash=2000,


?width=1000&height=1000&hash=2000,


?width=1000&height=1000&hash=2000,


?width=1000&height=500&hash=1500,


?width=1000&height=900&hash=1900,