433 Mhz Universaate e Control Switch DC 12V 10A Relay Receiver Mini Module e Control for Gate LED Garage Door

• Receiver sensitivity: > 97 dbm

• nsmitting distance:> 100 m open space

• De mode: MCU de

• e storage: 20

• Support e type: EV1527 learning code

• Working mode: Momentary, tole, latching time delay 5s ,10s ,15s

• Output terminal: NO , NC , COM

• e control battery: 2 x 3 V CR2016 on batteries

Note: Maximum input power is 250 V

e prograng

Working mode:

1. Inching mode: press the e controltherelaywill connect, and thenreleasethe e controlto disconnect the relay;

2. S-locking mode: press the e controltherelaywill connect, and then press the e controlagainto disconnect the relay;

3. Interlomode: press the e control key A toconnectthe relay, and press the e control key B to disconnectrelay.

4. Delay mode: press the e controltherelaywill connect, release the e control and start timing. After 5S, 10Sand 15S3 gears, the relay will be automatically closed.

Learning Methods:

1. Inching learning method:

Press the codepairingon on the control panel once, and the LED indicator will f once. After the LED indicatorlit, press the onyou need to pairing onthe e control,the LED indicator on the control panel will f for 3 timeswhich means the pairing succeed.

2. S-locking learning method:

Press the codepairingon on the control paneltwice, and the LED indicator will ftwice. After the LED indicatorlit, press the onyou need to pairing onthe e control,the LED indicator on the control panel will f for 3 timeswhich means the pairing succeed.

3. Mutual lolearning method:

Press the codepairingon on the control panelthree times, and the LED indicator will fthree times. After the LED indicatorlit, press the onyou need to pairing onthe e control,the LED indicator on the control panel will f for 3 timeswhich means the pairing succeed.

4.5Sdelay learning method:

Press the codepairingon on the control panel fourtimes, and the LED indicator will ffour times. After the LED indicatorlit, press the onyou need to pairing onthe e control,the LED indicator on the control panel will f for 3 timeswhich means the pairing succeed.

5. 10Sdelay learning method:

Press the codepairingon on the control panel five times, and the LED indicator will ffive times. After the LED indicatorlit, press the onyou need to pairing onthe e control,the LED indicator on the control panel will f for 3 timeswhich means the pairing succeed.

6. 15Sdelay learning method:

Press the codepairingon on the control panelsix times, and the LED indicator will fsix times. After the LED indicatorlit, press the onyou need to pairing onthe e control,the LED indicator on the control panel will f for 3 timeswhich means the pairing succeed.

-Clearing the code :

Push the learning on on the receiver 8 times , the codes will be reset.

After clearing the code, will be need to be recalibrated

Package including

1*Receiver module

1*e Control with battery