433 MHz e Control Wireless Switch DC 12V e Switch 2CH Rf Relay Receiver Module for Garage Door e Controller

433 MHz e Control Wireless Switch DC 12V e Switch 2CH Rf Relay Receiver Module for Garage Door e Controller

Relay Receiver Board

• Working voltage  :  DC 12V

• Input vlotage  :  1~250V

• Output vlotage  :  1~250V

• Quiescent Current  :  97dbm

• Amount of storage e controls  :  25 pieces

• Support en  :  1527 Leaning code /2262 fixed code

• RF Operating mode  :  ASK rheterodyne wireless reception

• Receiving range  :  Open space is more than 50 meters

• e operating mode   : Momentary Mode / Tole Mode / Latched Mode 

Package include
Relay Reciever Board with shell
e Control with battery

Working Modes
You can set up in 3 modes: Momentary mode,Tole mode and Latched mode.
Momentary mode:
Press and hold A on,this relay will work;Release A on,this relay will stop.
Tole mode:
Press A on,the relay will work;press A on again,this relay will stop.
Latched mode:
Press A on,the relay will work;press B on again,this relay will stop,second relay will work.
How to Set up
Momentary mode:
Press learning on once,press A on once,succeed.
Tole mode:
Press learning on twice,press A on once,press B on oncesucceed.
Latched mode:
Press learning on 3times,press A on once,press B on oncesucceed.
Clean data:
Press learning on 8times,the data will be cleaned.All cannot control this receiver.
If u want to change modes,u need to clean the data first.