3D Printer TMC2100 Motor Driver Reprap With Self Adhesive Heatsink TE724

Package Include:
1 x TMC2100 Module
1 x Adhersive Heat Sink

Features:
1. Essential motor driver module for 3D printers, , machines, etc
2. Come with heat sinks for better heat dissipation, and the best work current is 0.5A.
3. Ultra-silent with excellent stability.

Specifications:
1. Model: MKS TMC2100
2. Size: 1.5 x 2mm
3. The calculation method of driver current: i = Vref * 1.9 / 2.5
4. Default Vref is 0.65V, Default Current is 0.5A, current is 1A.

Note:
1. Make sure do not connect the motor when measuring voltage, otherwise it may burn driver.
2. When measure the voltage, shall be connected to the supply, dont just connect the USB supply.
3. Please pay special attention to the direction, not against, otherwise it may burn driver even the mainboard.

Using:
1. When using the Ramps1.4 or MKS Gen, remove the three caps under the socket.
2. Pay attention to the direction.
3. The heat sink is directly attached to the .









a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a