1. This module is a finished ZVS board without taps. Made of 1.6MM double-sided glass fiber board with stable magnetic ring performance
2. Too much current and tin at the bottom of the circuit board (can be used for induction heating to avoid burnout for induction heating, maximum power 300W (12V induction heating)
3 It is recommended to use a switching power supply with an input of 12V10A or more. This voltage range is the voltage during operation, not the voltage when the power supply is no-load!
4. Confirm that all connections are correct, and the positive and negative poles of the power cord are not reversed. After connecting the load (heating coil or high-voltage package), turn on the power again! No power can be supplied without load! No-load power will damage! Please don't boot directly without load
5. In induction heating, because of the heat sink, it will last longer than the ordinary mini ZVS. Please pay attention to the temperature is too high to power off and cool. Because the current is relatively large during induction heating, the coil heat is also relatively large. When heating, part of the heat generated by the heated object will be transferred to the heating coil, and the temperature of the heating coil will be very high for a long time.
Name: ZVS Board
Voltage: DC12V
Max. Current: 20A
Max. Power: 300W
colour:Photo Color
material:ABS
size:8x9cm
Package Contents:
1xInduction Board Heating Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.