3.5" LED Tachometer Car Meter With Shift Light+Stepping Motor RPM 7 Colors

Specification:
Material: Aluminum+ABS Plastic
Diameter: 3.75" (80mm)
: (10-15V) 12V Professional
Reads Range: 0 - 11000 RPM
LED Backlight: Red/White/Green/Purple/Yellow/Blue/Light Blue

Main Features:
High speed motor with a quick response !!（Please check the video in product page）
Maximum angle of deflective 270 (full sweep) is controlled by the microcomputer numerous to divisior
to provide high precision in the accuracy of information generated
The stepping motor is sufficient for quick response of all sorts of professional motorsports

LED illumination:
The dial is invisible while the ignition switch is off. Once the ignition switch is turned on, a clear
display appears by colored LED illumination
The dial illumination and the red emitting pointer provide high visibility

Opening and closing modes:
The dial and the pointer performs opening and closing modes interlocked with turning
ON/OFF of the ignition

Adjustable :
Choose the of backlights according to personal preference. 7 colors are available
Dual warmings of light and buzzer:
Two customer-defined warning RPMs can be set. When the Rpms are exceeded, the warning LED
blinks/ lights up and the warning buzzer sounds

Exclusive large-sized indicator:
The exclusive large-sized indicator which lights in green and red enhances the visibility of warnings in
addition to the warning LEd in the

Peak memory function:
The maximum RPM during driving can be stored and checked later
Detachable switch unit:
The large-sized switch unit with light is fixable on the and is also detachable
Exclusive mounting band and back case:
The is clinched by using the exclusive mounting band and back case. Wires can be stored in
the back case neatly

Fitment:
All 12V,4 6 8 cylinder and gasoline car.
（Note:Easy Installation With Users Manual In English,Professional installation is Highly Recommended most of cars or motor）



Package Include:
1 × 80MM Tachometer
1 × Shift Light
1 × Mounting Bracket
1 × Meter Cup
1 × Installation Manual

Wiring instructions:
Red Wire = Positive
Black Wire = Negative
White Wire = ACC
Green Wire = Signal lamp
Yellow Wire = Headlights（Can not connect, It's will become red light）


Q&A：
Q:How to adjust the brightness of the tachometer?
A：Press and the "peak set 1" botton and then you can adjust the brightness of the backlight.

Q:How to adjust the warning value and Cylinder?
A.
1.Press and the "peak set 2" botton ,the will show the current peak warning value.
2.Press the "peak set 2" botton ,and hold on 3 seconds ,then you can press and the"peak set 1" botton to adjust the peak warning value you want.(If reach the peak warning value,waring light will show the red )
3.Press the "peak set 1" botton ,and hold on 3 seconds ,then you can press and the"peak set 2" botton to adjust the early warning value you want.(If reach early warning value,the warning light will show the green )
4.Press the "peak set 1" botton and"peak set 2" botton at the same time，and hold on 3 seconds，then you can press and "peak set 2" botton to adjust the suitable Cylinder for your car.



















a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a