3-5V Stereo Receiving PCB Board with Serial Control DSP PLL FM Radio Receiver Module 87-108MHz Frequency Modulation LCD Display

Hign-concerned Chemical : NoneModel Number : FM Radio Receiver ModuleSupply Voltage : 3.0-5.0 VApplication : ComputerCondition : NewType : Voltage RegulatorBrand Name : APWIKOGER : Mainland ChinaFM Radio Receiver Module : Digital Stereo Receiver ModuleFM Radio Receiver Board : Stereo Receiving PCB Board Spanish buyers Attention:
If your address includes following postal es, please do not choose the Spanish warehouse.
The Zip e starts with 35/38.
The overseas warehouse cannot deliver, Otherwise we will send the order from the Chinese warehouse.DSP PLL Digital Stereo Receiver Module 87-108MHz 3-5V Stereo Receiving PCB Board Frequency Range 50Hz-18KHz Frequency Modulation Feature:
1. Advanced DSP and Phase-Locked Loop (PLL): The FM radio receiver module utilizes advanced DSP and PLL technology to deliver realistic sound with stable performance. It ensures working hours without frequency deviation.
2. Intuitive LCD Display: The digital stereo receiver module features an LCD display that provides accurate and clear information with extremely low power consumption and minimal noise. It allows easy operation with functions like radio station search and storage. The built-in 30-step digital volume adjustment keys make it effortless to control the audio output.
3. Automatic Power Loss Memory: The FM radio receiver board automatically saves and recalls data before power loss, ensuring convenience and avoiding the need for frequent settings adjustments. It also supports automatic switching between speaker and headphone output. The quartz crystal ensures stable frequency reception even in temperature variations, eliminating frequency drift.
4. Professional Audio Signal Processing: Equipped with DSP audio signal analysis processing, the stereo receiving PCB board offers automatic muting when there is no signal or when the FM signal is weak, effectively reducing background noise. Say goodbye to annoying static noise common in traditional FM radios, especially during weak signal reception.
5. Digital Incremental Rotary Ener: The frequency modulation features a high-quality ener for adjusting volume and frequency. It provides a smooth and precise feel with stable and durable performance. With a 360° rotation design, it allows easy and accurate adjustment. The module also supports serial communication control, making it suitable for use with other computers or devices to enable full functionality with MCU modules.Specification:
: Mainland China
Type: Voltage Regulator
Condition: New
Application: Computer
Supply Voltage: 3.0-5.0 V
Model Number: FM Radio Receiver Module
Output power: 500mW (driving headphones), 3Wx2 (driving speakers)
Frequency range: 50Hz-18KHz
Product size: 75 x 45 x 30mm/3.0 x 1.8 x 1.2inch
Receiving frequency range:
Closed Campus Radio 87.0MHz-108.0MHz
Open Campus Radio 76.0MHz-108.0MHz
Equivalent noise: ≥30dB
Supply voltage: 3.0V-5.0V
Supply current: 1000mA max volume, 60mA min volume (for reference only)
Channel: Stereo
 : Power supply
Corresponding to the module port (PCB board label) -, + are connected to the negative and positive terminals of the power supply (battery), it is recommended to use battery or other power supply power. Switching power supplies without filtering (such as mobile phone chargers and other switching power supplies) should not be used, otherwise the resulting interference power will affect the normal operation of the module. The normal operating voltage of this module is 3.0-5.0V, be careful not to exceed the supply voltage range.
: Antenna
The FM_ANT port is used to connect the FM antenna. For better reception of FM signals, an external 75cm trolley antenna is recommended.
: Headphone/speaker output
The module comes with a 3WX2 channel audio amplifier, the speaker should be connected to the speaker port recommended 4Ω/3W speaker. If headphones are inserted, the audio automatically switches to the headphone channel and the speaker channel is automatically closed.
Volume control
Turn the VOL ener to adjust the volume, while the LCD screen shows the volume series.
Frequency adjustment
FRE rotate the ener to receive the frequency, while the LCD screen shows the current frequency under short, the ener handle is pressed for the mute/unmute switch.
Mute
Press VOL knob to mute/unmute
Auto Mute Switch
Press the FRE knob to turn on or off the auto squelch function, LCD display caption ON to turn on auto squelch, OFF to turn off auto squelch.
Auto Squelch Threshold Adjustment (Auto Squelch switch on is valid)
Press the FRE knob to enter the automatic squelch threshold adjustment interface, the user can adjust the automatic squelch threshold through specific actions, the adjustment range 0-20, the higher the value the more restricted the door, the weaker the signal the easier to mute. The opposite is true.
: Access to the serial port (non-contactless serial control)
TTL level serial port module reserved control interface, TTL serial communication module needs to be connected to UART_RX, UART_TX and GND module (PCB corresponding position, marked), you can use external MCU (microcontroller) or PC serial port to send commands associated control module functions. Note: As the PC serial port level is not TTL level, connecting the PC with RS323 communication requires a TTL level electrical switch device for simple installation or using a USB to TTL level serial port module to communicate with the module. Because the serial command control module requires a certain degree of computer expertise, buyers who do not understand please do not try.
: User set
This module can set whether to listen to the campus radio band in the backlight state, according to the user's application settings as follows. Shutdown state press VOL knob down power LCD display shows open campus radio C0 C1 means close campus radio band, the setting takes effect after reboot. By setting the backlight state to off press the FRE knob key to turn on the display backlight always indicates B1, B0 means the backlight is turned off for 20 seconds to take effect after reboot. Repeat this step to change the setting to toggle the status. The factory setting is not to open the unified campus radio band, 20 seconds without operation backlight off.
Note: The factory default setting is Off campus radio, 20S backlight off automatically without operation, Off Auto Squelch. user to set according to the situation.
Noise adjustment method of this module:
This module uses DSP digital squelch, flexible use of software to control the squelch threshold (threshold). When the squelch threshold is 0-20, the smaller the number, the lower the squelch threshold, the easier it is to hear the broadcast signal with background noise, the larger the number, the higher the noise threshold, the output noise is higher than the set value, the automatic static Noise on, so that the output is muted. So when adjusting the squelch threshold, turn the squelch threshold down if you want to hear a weak signal and up if you want to hear a strong signal, depending on the situation. It is important to note that the squelch function does not remove the signal background noise, but rather controls the output squelch based on the noise level of the signal exceeding the threshold.Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement. 1 x FM Radio Receiver Module [relateproductdetail/]
http://cbu01.alicdn.com/img/ibank/2018/973/313/9078313379_1673125945.jpg>


http://cbu01.alicdn.com/img/ibank/2018/719/772/9078277917_1673125945.jpg>























http://cbu01.alicdn.com/img/ibank/2018/511/370/9097073115_1673125945.jpg>


http://cbu01.alicdn.com/img/ibank/2018/616/340/9097043616_1673125945.jpg>