2in1 Bluetooth 5.0 Receiver nsmitter Usb Tv Computer Car Adapter Music Stereo Wireless 3.5mm Adapter For Car TV PC Speakers

Features:

Switch between nsmitter and receiver modes with the simple fliof a switch: Effortlely connect using advanced Bluetooth technology and 3.5mm audio cable (included).

Broad Compatibility: With the included 3.5mm cable and 3.5mm to 2RCA cable, this Receiver nsmitter adapter can widely be used on most device

r-Portable: just 44mm (1.73") acro and weighs only 18g (0.63oz), Slip this nsmitter and receiver, you can take it on-the-go without the slightest effort.

Description:

Name: 2 in 1 Car  Adapter

Model: KN321

Technologies: BT5.0, A2DP, AVRCP (receiver mode only)

Operation Range: Up to 10m / 33ft (without any blocking objects)

Charging Time: 2 hour

Continuous Use Time: 4 hours (Receiver Mode) / 3 hours (nsmitter Mode)

Battery Type: Li-Polymer (200mAh)

Dimensions: 44 × 44 × 12mm

Weight: 18g

Bag: 62g

Color box: 72g

Color box size: 9.3 * 10 * 2.2cm

Features:

This extremely portable, lightweight wirele audio nsmitter & receiver is an ideal wirele audio solution for a wide range of situations and use

nsmitter mode:wirelely streams audio from your non-Bluetooth TV, home stereo system, or CD player to your Bluetooth headphones or speaker

Receiver mode: wirelely streams audio from your Bluetooth-enabled phone, tablet, or computer to your wired stereo, speakers, or headphone

Operation:

Power on: pre and hold the power on / off on until the LED lights up

Power off: pre and hold the power on / off on until the LED goes out

Charging: use dc-5v charger and micro USB charging cable. The red light is on when charging. When the battery is fully charged, the red light goes out and the blue light comes on.

Switching mode:

1) Rx: receiving mode, indicator light: blue LED2) TX: emiion mode, indicator: Red LEDRX mode:Pairing Name: kn321, find kn321 pairing in Bluetooth settings of mobile phone. During the pairing proce, the blue light fes twice a second, and after the pairing is succeful, the blue light fes once every three seconds.TX mode:TX mode will automatically search for other Bluetooth receiving devices (such as Bluetooth speaker, Bluetooth receiver, etc.). During pairing, the red light fes twice a second. After pairing, the red light fes once every three seconds, which is very succeful.

How to use:

1) Insert one end of the audio cable into the audio output terminal of the device, and the other end into the audio input terminal of kn321.2) e sure it is in TX mode (red light fing). Kn321 will automatically search for Bluetooth headset or Bluetooth speaker pairing.

Packing list:

1*Bluetooth Audio nsmitter/Receiver Adapter1*Micro USB Power Cable1*RCA Cable1*3.5mm Aux Cable1*User ManualNote：Due to the difference between different monitors, the picture may not reflect the actual color of the item.Please allow 0-1cm error due to manual measurement. Please e sure you do not mind before you bid.