2CH RX MULTI 433-868MHz Garage Gate Door Opener WIFI Tuya Smartlife App e Control Receiver Controller Smart On Off Switch

Warm Tip.

You can choose two versions: WIFI+RF version and RF version, you can choose two voltages: AC DC 9-30V AC 85-250V.

WIFI + RF VERSION

HIGHLIGHT

[ APP e Control ] -WIFI Smart Garage Receiver can be controlled via smart life&Tuya Smart APP on your Phone/Tablet anywhere and anytime.
[ RF Control ] - Compatible with many different codes fixed code, rolling code, learning code, different frequencies of the e control 300-900MHz,Please contact us for details of compatible brands.
[ Hand Free Voice Control ] -WIFI Smart Garage Receiver can also connect with your and google home,simple a voice command to control it.
[ Schedule & Count Down Function ] -You can create schedule according to your personal requirement ,as well as count down function,smart and DIY your daily life to the maximum extend.
[ Working mode ] - Momentary.
[Family Share Function] Create a smart home together with your family member.
[ Easy to be installed ] - A great external receiver that& x27;s easy to install and simple to use

Working frequency: 300-900MHzRolling code & Fixed code

300MHz
310MHz
315MHz
318MHz
390MHz
433.4MHz
433MHz
433.92MHz
868MHz
868.3MHz
868.8MHz

Can identify ALL Fixed code 2262, 2260, 2264, 5326, M1E, M5E and so on. All Learning code 1527, 2240, 6P20B, 6P20D and so on, Rolling code HCS301, HCS300,HCS200, HCS201, HC0, HC1,

s:

Input voltage：DC/AC 9V~30V AC85-250V
Max.Current:2200W/10A
Radio Frequency:300-900MHz
Codes: Working with any fixed and rolling code e control
Working temperature: -20Celsius~70Celsius
Prograng: press and hold the learn on on the receiver few seconds. Then hold and press
the e control on to prograng.
Delete code: Press and hold the delete code about 20 seconds.

WARM REMINDER

Checklist before using the device
Your smart phone or tablet has connected to a2.4g WiFi with internet.
You need to enable Bluetooth of the phone.You have the correct WiFi PWD.
You have the correct WiFi PWD.
You smart phone or tablet must have access to APPstore,Google play.
Your router is MAC-open

RF VERSION

Universal Multi frequency 300-868mhz garage gate door receiver

Working frequency: 300-900MHzRolling code & Fixed code

300MHz
310MHz
315MHz
318MHz
390MHz
433.4MHz
433MHz
433.92MHz
868MHz
868.3MHz
868.8MHz

Can identify ALL Fixed code 2262, 2260, 2264, 5326, M1E, M5E and so on. All Learning code 1527, 2240, 6P20B, 6P20D and so on, Rolling code HCS301, HCS300,HCS200, HCS201, HC0, HC1,

Some Brand e controls ATA PTX4, APRIMATIC, ALLMATIC, BENINCA, DEA, ECOSTAR, ERREKA, FOX, GIBIDI, HORMANN Blue on, LIFTMASTER, NOVOFERM, PUJOL, SEAV, SOMMER, VDS....

Specifications:

1Name: Universal receiver SMG-662.
2Operating Voltage: 9V-30V AC 85-250V
3: 2.
4Frequency: 300MHz - 900MHz.
5 Distance: 30-50 meters.
6 Very mini size: 5.5cm*4.5cm*1.0cm.
7 One receiver can work with 400 codes.
8 It don’t interference other and receivers.
9 Brand selector: With 8 dip switches user can e different combination for different e brands.
10Code: Rolling and Fixed code & Learning code.
11Uses: Receiver is designed to control any gate automation system, burglar alarm system, electric doors, windows, lifting equipment, s, lifting devices. This is an easy to use, good looking, low power consumption and is easy to connect to your existing system.
12 Power Input Selector: This receiver can work at AC/DC 9V~30V. However, it’s better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V.

Prograng a new e

1 Select the correct brand for e to be programmed by moving dip switches UP or DOWN. For example 433,92Mhz Marantec e controls, just move Dip-switch 7 UP.

2 Press the learn on. The will LED turn on.

3 Press the on on the e, the LED fes 4 times. It means that e control was programmed successfully.

4 Repeat step 2 for another on.

5The 2-nd prograng procedure is the same.

Erase all data from the memory card: Press and hold either learn on. The LED will start f. Keep this on pressed, until the LED will turn off. All saved data in the memory card will be erased permanently and can not be recovered

Work with 433MHz 1527 learning code e control

In order to better adapt to our receiver, it is recommended to choose to buy our e control
Note: no battery include