250-868MHz Multi Frequency e Control 315/433Mhz Auto Copy Duplicator for Home Electric Garage Door Gate Opener Key

The copyable chip model has a learning range:

1. HT-12E, 2. AX5326-3, 3. AX5326-4, 4. AX5026, 5. PT2262, 6. PT2242, 7. HT600, 8. HT680, 9. HT6207, 10. HT6010, 11. HT6012 12. HT6014, 13. MC145026, 14. HT640, 15.EV1527, 16.527, 17.PT2260, 18.SMC918, 19.SMC926, 20.HT12D, 21.PT2240B

Duplication and regeneration of wireless e controls for barriers, garage doors, etc.

The scope of application of copy e control:

Ordinary fixed code chip type 2260, 2262, 2264, learning code 1527, 2240 e control.

technical :

Product name: Multi-frequency four-on copy e control

Working voltage: 6V

En type: copy, copy

Working frequency: multi-frequency 250-868MHZ

Number of keys: four keys

Product size: 62*37*14MM

Operation method:

 1. Code pairing

P the e control and the copy e control as close as possible, first press a on of the e control, and immediately after the indicator light turns on, press and hold a on of the s-copy e control for about three seconds, the LED will f 3 times and then quickly Fing, it means that the aess code of the e control on has been learned successfully. The other keys are operated in the same way for learning.

2, clear code

Press the unloon and the loon at the same time for 2 seconds, the LED light will start to f 3 times. At this time, keep the loon pressed and release the unloon. Press the unloon three or four times within 5 seconds, and the indicator light fes quickly, which indicates The code has been cleared.

Test whether the existing code of the e control has been successfully cleared: When you finish the clearing action, you can press any on of the copy e control. If the LED does not f immediately at this time, it will f after 2 seconds, that means The code of the copied e control has been completely cleared. If the LED still fes quickly and immediately, the code still exists and needs to be cleared again.

3, restore the cleared code

The copy e control has a recovery function. If you accidentally clear the aess code of the normal copy e control during use, you can press the start and mute ons the next two ons on the e control at the same time. After about three seconds, the LED will f 3 times. It starts to f quickly, which means that the cleared aess code is successfully restored.

*Precautions:

1. Before using our copy e control to copy, first clear the existing code of the s-copy e control.

2. The s-copy e control cannot copy the rolling code, such as HCS301.