24Ghz Millimeter Wave BSD Blind Spot System Universal Change Lane BSM Blind Spot Monitoring ist Drive Safer

Product introduction:This system product can warn the dangerous targets in the adjacent lanes. The unique ability of 24Ghz millimeter to penete e, fog and dust can realize all-weather and all-time application, detect the objects in the signal area in real time, and calate the speed, angle and relative dispment of objects at the same time. It can detect the target within 20M(65.61ft) at the farthest, and finally output the alarm signal, which includes the first-level alarm and the second-level alarm.Product functions explanation:1.After the ACC is powered on, the system can immediately enter the working state after the environmental adaptation test. When the car is turned off, the stops working.2.The system is in the first-level early warning state except when the turn signal lamp is turned on, double fing warning lamp and R re gear is ened.3.When the turn signal is turned on, double fing warning lights and R re gear is ened, the system is in the second-level early warning state. Level 1 alarm: the reminder light is always on. Level 2 alarm: the warning light fes+the sounds. The alarm range is centered on the rear of the car. The lateral distance is X and the lonudinal distance is Y. The left lateral distance of the center is negative, and the right lateral distance of the center is positive.Features:The system is a vehicle auxiliary device that can help the driver to safely change lanes while driving. During driving, when the side and rear vehicles are in danger of colliding with my car, the warning light will light up to remind the driver. If the left/right turn signal is turned on, it will be accompanied by an audible warning. The blind spot starts when the car starts. When you open the door, if there are pedestrians, cars and motorcycles on the side, it will be detected and accurately alarmed. The blind spot system can distinguish between stationary objects and moving objects. Stationary objects do not alarm. Pedestrians and vehicles in a driving state will sound an alarm when they are detected. When waiting for ffic lights: After parking, the car behind is still, and the blind spot system does not alarm. Normal driving: When the car behind is slower than us, there is no danger of collision and there is no warning. Similarly, when we overtake, the speed is faster than the car behind and there is no warning.Specifications:Applicable conditions: Universal (There must be no metal objects in front of the 2 signals to blothe )Operating frequency band: 24GhzElectricity voltage: 12VPower consumption: LED light turn on. Method 2 => LED f and sound.

Packing List:

*2Power cord*1Power extension cable*1(length 5m/196.85in) extension cable*1 (length 5m/196.85in)Warning light extension cable*2 (the length is 4m/157.48in respectively)Warning light*2 (lengths are 270mm/10.62in respectively)Mounting bracket*2*1Cable ties*a fewAngle ruler*1Adhesive*2User manual*1Package box*1Note:

It is recommended that the installation be carried out by profeionals. The installation angle of will affect the distance and effect. Please install it strictly according to the instructions. Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 10-30mm.