20m Blind Spot r For Car Change Lane ed Parking Monitoring System 24Ghz Millimeter Wave Warning BSM

V3 Blind Spot r For Car Change Lane ed Parking Monitoring System BSD Millimeter Wave Warning r Tools

DescriptionLevel 1 Warning: Indicator lamp is always onLevel 2 Warning: Indicator lamp fes + emits prompt tone1.Signal range:Fan-shaped signal surface with 40° angle horizontally and 50° angle lonudinally.2.Starting mode:Power-on starting.3.Pre-warning mode:A.If the target object enters the signal area with the more rapid speed (this vehicle doesn't turn on the turn signal lamp), it will produce the Level 1 Warning until the target object leaves the monitoring area, and the warning is canceled;B.If the target object enters the signal area with the more rapid speed (this vehicle turns on the turn signal lamp), it will produce the Level 2 warning until the target object leaves the monitoring area, and the warning is canceled.

I.Line Connection Legend

Connection method of power line:

A. Connect the blaline of power line with the negative pole of vehicle or bond sp.B. Connect the red line of power line with ACC power of vehicle (vehicle starts with normal power/stops with no power).C. Correspond the extension line of indicator lamp with the indicator lamp, plug in the male and female for connection.2. Connection method of power extension line:Lay out the power extension line from the vehicle head to vehicle tail. Plug in with the power line at the vehicle head, andplug in with the line at the vehicle tail.3. Connection method of line:A. Plug in with the power extension line.B. Plug in the with the right and left plugs respectively.C. Connect the yellow line of line with the positive pole of vehicle's left turn signal lamp.D. Connect the orange line of line with the positive pole of vehicle's right turn signal lamp.E. Connect the white line of line with the positive pole of vehicle's revering lamp.II. Installation Method1. Installation height of : 0.4~0.9m from the ground.2. Installation angle of : According to the operation method of scale, 20° arrow inclined surface fits the signal surface, the scale is parallel to the vehicle body.3. 's location inside vehicle:A. It can be fixed on the bumper.B. It can be stuinside the basurrounding.4. If the signal surface towards the vehicle, the front of signal surface can't be blocked by the metal substances.5. The outlet is left or right.The schematic diagram of installation is shown as below:III. Operation Instruction1. After vehicle ACC powers on, the system will immediately enter the environmental adaptability prior to entering the working stats. After the vehicle stops, the will stop working.2. If not turning on the turn signal lamp and double-f warning lamp, the system will stay in the Level 1 warning status.3. If turning on the turn signal lamp and double-f warning lamp, the system will stay in the Level 2 warning status.. Notice1. Under the following circumstances, the may not emit the prompt:a. The vehicle is located at the rear blink spot of adjacent lanes and keeps the relative same speed for time.b. The adjacent lanes where vehicle is located are extremely wide, which exceeds the computation range of signal.c. When driving through the hills or top of hill roads.2. If the roads are narrow, it is poible to detect the vehicles of two lanes.3. The pre-warning signal lamp of this system may be turned on to the stationary objects on the road or road side. (e.g. guardrails/walls/tunnels/green belts etc.)

Dong Guan lingou electronic technology Ltd is an enterprise integrating the production and de of automobile

acceories, with products certified by CE/FCC/ROHS.

The company has a strong R&D, production, warehousing and shipment capabilities, experienced team of engineers,

and continuous improvement of the production proce. The products will be 100% inspected before shipment,

and we have established long-term cooperation with many international logistics companies to provide perfect

after-s service. The company adheres to the "quality first, customer first" busine philosophy, continuous innovation,

to provide customers with quality products and services.

Q1:Can you design a program to my specifications?

A:Yes, we have design capabilities and can customize a solution to your needs.

Q2:What is the use of the blind zone monitoring changing lane auxiliary system？

A:Preventing vehicles from g rear-ended and side-collided by rear-ended vehicles, especially when changing lanes at medium and high speed, solve the problem of medium and high speed collision between vehicles, which is the main prit of major ffic accidents. Data prove that more than 70% of major ffic accidents are caused by blind lane changes at medium and high speed. Therefore, this auxiliary system is of great significance to driving safety.

Q3:Does the blind zone monitoring changing lane auxiliary system have other functions besides preventing lane change accidents?

A: Yes. There is also a croing warning function and a door opening warning function, which can greatly reduce the impact accidents of and opening the door.

Q4:How does the blind zone monitoring changing lane auxiliary system predict the collision risk of lane change in advance?

A:Blind zone monitoring changing lane auxiliary system is to continuously nsmit radio waves to the rear through two millimeter wave s installed on both sides of the rear bumper of the car, and calate the time when the rear-coming car approaches us through the time difference between nsmiion and recovery. If this time is greater than the time range of safe lane change, that is, if there may be collision risk during lane change at this time, the system will remind the driver through the warning light on the rearview mirror within three thousandths of a second. If the driver tries to change lanes by turning on the turn signal at this time, the warning light will change from normally on to fing on, and the driver will be reminded not to change lanes at this time by the dripping three times, otherwise there is a risk of collision。

Q5:Will the blind zone monitoring changing lane auxiliary system not work due to weather?

A:INo. One of the major characteristics of millimeter wave is that they can not be affected by bad weather. They can be used normally in foy and snowy days. In fact, the value of this system can be better reflected in bad weather.

Q6: Will the installation of the product affect the functional use of the car?

A:No. The system is an independent system, and only ACC is borrowed from the car (it will not affect the power consumption of the battery). In addition, it does not intervene in the car system and did not affect the warranty of the car, conflicts with the car and other related iues.

*If you have any questions, you can contact our customer service in 24 hours and we'll try our best to help you.

*If you are satisfied with our product, please kindly leave us a positive feedbaand 5 stars.

*At the same time, we also take the customers'special requirements of products and OEM. Looking forward to cooperating with you!