This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeHome & FurnitureFurnitureHome Office FurnitureErgonomic Accessories20/24Pin PC Power Supply Tester PSU ATX SATA HDD Meter Measuring Checker Voltage Tester LED Indicati More
/product/16/5107652/1.jpg?3547)
Share this product
Shipped from abroad
20/24Pin PC Power Supply Tester PSU ATX SATA HDD Meter Measuring Checker Voltage Tester LED Indicati More
GH₵ 659.60
GH₵ 950.3031%
In stock
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 62.83 to Tema
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 62.83
Ready for pickup between 24 October & 29 October when you order within next 12hrs 14mins
Door Delivery
Delivery Fees GH₵ 74.73
Ready for delivery between 24 October & 29 October when you order within next 12hrs 14mins
Return Policy
Free return within 15 days for all eligible items.Details
Seller Information
LotusS
60%Seller Score
Be the first to follow
Seller Performance
This seller does not have enough history for us to evaluate his performance yet
Product details
Descriptions:
1. This power tester only needs to be connected to the power supply ATX connector to easily and intuitively know whether the output of each power supply is normal. This includes a POWER GOOD signal that we can't measure with a multimeter. (The POWER GOOD signal is required to provide a POWER GOOD signal to the motherboard after the power supply starts. Then the motherboard will start the self-test procedure. If the power supply output is normal, POWER When the GOOD signal is abnormal, the system will not boot. The POWER GOOD of this power tester can test whether the signal output is normal or not.
2. This new ATX power tester can be tested: 4PIN/6PIN/8PIN, HDD power interface / SATA power connector, FLOPPY, 20PIN/24PIN is powerful
Specifications:
Input Port: 20/24pin (ATX- connector)
Voltage Test: +12V, -12V, +5V, -5V, +3.3V, 5V Stand by(SB)12V,power Good(PG)
Connector Port: Floppy, HDD, CDROM, SATA, 4 pins (P4),8 pins (Dual-CPU), 6 pins (PCI-Express)
Package Included:
1*PC Power Supply Tester
How to use
1. Power the power to be tested
2. Plug the 24P (20P) plug of the power supply to be tested into the 24P (20P) socket corresponding to the power tester.
3. Check whether the seven lights on the right (+3.3, -12V, PG, +5VSB, +12V, -5V, +5V) are on, and all lights up. (Note: Some power supplies are not lit, it is normal, because P4 is above. Is no -5V voltage)
4. Plug the HDD plug to be tested into the HDD socket of the power tester and check if the two lights on the left (+12, +5V) are on, all lights up.
5. Pull out the HDD plug from the power tester, and then insert the P4 (P6/P8) plug into the corresponding P4 (P6/P8) socket to see if the left one (+12V) is on, it is good.
6. Pull out the P4 (P6/P8) plug from the power tester, and then insert the FLOPPY (floppy drive) plug into the corresponding FLOPPY socket to see if the two lights on the left (+12V, +5V) are on, all lights up.
7. Remove the FLOPPY plug from the power tester, and then insert the SATA plug into the corresponding SATA socket to see if the three lights on the left (+12V, +3.3V, +5V) are on, and all lights up.
1. This power tester only needs to be connected to the power supply ATX connector to easily and intuitively know whether the output of each power supply is normal. This includes a POWER GOOD signal that we can't measure with a multimeter. (The POWER GOOD signal is required to provide a POWER GOOD signal to the motherboard after the power supply starts. Then the motherboard will start the self-test procedure. If the power supply output is normal, POWER When the GOOD signal is abnormal, the system will not boot. The POWER GOOD of this power tester can test whether the signal output is normal or not.
2. This new ATX power tester can be tested: 4PIN/6PIN/8PIN, HDD power interface / SATA power connector, FLOPPY, 20PIN/24PIN is powerful
Specifications:
Input Port: 20/24pin (ATX- connector)
Voltage Test: +12V, -12V, +5V, -5V, +3.3V, 5V Stand by(SB)12V,power Good(PG)
Connector Port: Floppy, HDD, CDROM, SATA, 4 pins (P4),8 pins (Dual-CPU), 6 pins (PCI-Express)
Package Included:
1*PC Power Supply Tester
How to use
1. Power the power to be tested
2. Plug the 24P (20P) plug of the power supply to be tested into the 24P (20P) socket corresponding to the power tester.
3. Check whether the seven lights on the right (+3.3, -12V, PG, +5VSB, +12V, -5V, +5V) are on, and all lights up. (Note: Some power supplies are not lit, it is normal, because P4 is above. Is no -5V voltage)
4. Plug the HDD plug to be tested into the HDD socket of the power tester and check if the two lights on the left (+12, +5V) are on, all lights up.
5. Pull out the HDD plug from the power tester, and then insert the P4 (P6/P8) plug into the corresponding P4 (P6/P8) socket to see if the left one (+12V) is on, it is good.
6. Pull out the P4 (P6/P8) plug from the power tester, and then insert the FLOPPY (floppy drive) plug into the corresponding FLOPPY socket to see if the two lights on the left (+12V, +5V) are on, all lights up.
7. Remove the FLOPPY plug from the power tester, and then insert the SATA plug into the corresponding SATA socket to see if the three lights on the left (+12V, +3.3V, +5V) are on, and all lights up.
Specifications
Key Features
Descriptions:
1. This power tester only needs to be connected to the power supply ATX connector to easily and intuitively know whether the output of each power supply is normal. This includes a POWER GOOD signal that we can't measure with a multimeter. (The POWER GOOD signal is required to provide a POWER GOOD signal to the motherboard after the power supply starts. Then the motherboard will start the self-test procedure. If the power supply output is normal, POWER When the GOOD signal is abnormal, the system will not boot. The POWER GOOD of this power tester can test whether the signal output is normal or not.
2. This new ATX power tester can be tested: 4PIN/6PIN/8PIN, HDD power interface / SATA power connector, FLOPPY, 20PIN/24PIN is powerful
Specifications:
Input Port: 20/24pin (ATX- connector)
Voltage Test: +12V, -12V, +5V, -5V, +3.3V, 5V Stand by(SB)12V,power Good(PG)
Connector Port: Floppy, HDD, CDROM, SATA, 4 pins (P4),8 pins (Dual-CPU), 6 pins (PCI-Express)
Package Included:
1*PC Power Supply Tester
How to use
1. Power the power to be tested
2. Plug the 24P (20P) plug of the power supply to be tested into the 24P (20P) socket corresponding to the power tester.
3. Check whether the seven lights on the right (+3.3, -12V, PG, +5VSB, +12V, -5V, +5V) are on, and all lights up. (Note: Some power supplies are not lit, it is normal, because P4 is above. Is no -5V voltage)
4. Plug the HDD plug to be tested into the HDD socket of the power tester and check if the two lights on the left (+12, +5V) are on, all lights up.
5. Pull out the HDD plug from the power tester, and then insert the P4 (P6/P8) plug into the corresponding P4 (P6/P8) socket to see if the left one (+12V) is on, it is good.
6. Pull out the P4 (P6/P8) plug from the power tester, and then insert the FLOPPY (floppy drive) plug into the corresponding FLOPPY socket to see if the two lights on the left (+12V, +5V) are on, all lights up.
7. Remove the FLOPPY plug from the power tester, and then insert the SATA plug into the corresponding SATA socket to see if the three lights on the left (+12V, +3.3V, +5V) are on, and all lights up.
1. This power tester only needs to be connected to the power supply ATX connector to easily and intuitively know whether the output of each power supply is normal. This includes a POWER GOOD signal that we can't measure with a multimeter. (The POWER GOOD signal is required to provide a POWER GOOD signal to the motherboard after the power supply starts. Then the motherboard will start the self-test procedure. If the power supply output is normal, POWER When the GOOD signal is abnormal, the system will not boot. The POWER GOOD of this power tester can test whether the signal output is normal or not.
2. This new ATX power tester can be tested: 4PIN/6PIN/8PIN, HDD power interface / SATA power connector, FLOPPY, 20PIN/24PIN is powerful
Specifications:
Input Port: 20/24pin (ATX- connector)
Voltage Test: +12V, -12V, +5V, -5V, +3.3V, 5V Stand by(SB)12V,power Good(PG)
Connector Port: Floppy, HDD, CDROM, SATA, 4 pins (P4),8 pins (Dual-CPU), 6 pins (PCI-Express)
Package Included:
1*PC Power Supply Tester
How to use
1. Power the power to be tested
2. Plug the 24P (20P) plug of the power supply to be tested into the 24P (20P) socket corresponding to the power tester.
3. Check whether the seven lights on the right (+3.3, -12V, PG, +5VSB, +12V, -5V, +5V) are on, and all lights up. (Note: Some power supplies are not lit, it is normal, because P4 is above. Is no -5V voltage)
4. Plug the HDD plug to be tested into the HDD socket of the power tester and check if the two lights on the left (+12, +5V) are on, all lights up.
5. Pull out the HDD plug from the power tester, and then insert the P4 (P6/P8) plug into the corresponding P4 (P6/P8) socket to see if the left one (+12V) is on, it is good.
6. Pull out the P4 (P6/P8) plug from the power tester, and then insert the FLOPPY (floppy drive) plug into the corresponding FLOPPY socket to see if the two lights on the left (+12V, +5V) are on, all lights up.
7. Remove the FLOPPY plug from the power tester, and then insert the SATA plug into the corresponding SATA socket to see if the three lights on the left (+12V, +3.3V, +5V) are on, and all lights up.
What’s in the box
1*package
Specifications
- SKU: GE779FD3KWKRXNAFAMZ
- Model: avoid chenicals
- Production Country: China
- Size (L x W x H cm): 12 x 13 x 14 cm
- Weight (kg): 1
- Color: Matches the image
Verified Customer Feedback
This product has no ratings yet.
/product/16/5107652/1.jpg?3547)
20/24Pin PC Power Supply Tester PSU ATX SATA HDD Meter Measuring Checker Voltage Tester LED Indicati More
GH₵ 659.60
GH₵ 950.3031%
Questions about this product?
