200kHz Bandwidth Oscilloscope Transistor Tester Digital Oscilloscope 2 In 1Electronic Component Tester with Adapter

FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.

FNIRSI-TC2 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Pre the [Up] and [Down] keys of the direction keys to select,Select "Mos Test" item, pre【OK】key to enter component tester mode;Select the "Oscilloscope" item, pre【OK】key to enter the oscilloscope mode.

"Mos Test" mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.

FNIRSI-TC2 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordle components, and preliminary screening of small batch components.

"Oscilloscope" mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yours and complete the upgrade.

It is hoped that FNIRSI-TC2 can make the study and work of the majority of users more efficient and interesting.

This product is a collection of digital oscilloscope, electronic component tester and PWM signal . Built-in rechargeable lithium battery, and equipped with a 2.4-inch large-size color dot matrix TFT display. It will be your most practical electrician tool.

feature:

Two-in-one function: This product cleverly integrates digital oscilloscope, electronic component tester, PWM signal and other functions into one.

The oscilloscope has a real-time sample rate of 2.5MS/s and a bandwidth of 200kHz.

With full trigger function (Single, Normal, Automatic), it can be freely used for periodic analog signals and aperiodic digital signals.

This product is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordle components, and preliminary screening of small batch components.

It can measure voltage signals up to ±400V for a wide range of applications.

Equipped with an efficient one-button automatic measurement function, the measurement waveform can be displayed without tedious adjustment.

Comes with 80kHz /5.0V PWM wave test signal source, adjustable duty cycle.

This instrument can automatically identify and measure various transistors. Including NPN transistors, N- and P- field effect transistors, junction field effect transistors, diodes, double diodes, thyristors, etc., as well as paive components such as resistors, inductors, and capacitors

Pin definitions are automatically detected.

Specification:

Material: ABS

Type: without adapter, with adapter (optional)

Display: 2.4-inch color screen with backlight

Battery: 1*Lithium battery, 10mAh (included)

Charging: USB Type-C, 5V

Packing size: 140*125*55mm/5.5*4.9*2.2in

Package Weight:

Without adapter: 296.6g / 10.5ounce

With adapter: 345.6g / 12.2ounce

Oscilloscope Specifications:

Real-time sampling rate: 2.5MS/s

Analog Bandwidth: 0-200kHz

Input resistance: 1MΩ

Coupling: AC/DC

Test voltage range:

1:1 Probe: 80Vpp (±40V)

10:1 Probe: 800Vpp (±400V)

Vertical sensitivity: 10mV/Div~10V/Div (in 1-2-5 increments)

Vertical dispment: adjustable, with indication

Horizontal time base range: 10us/Div~0s/Div (in 1-2-5 increments)

Trigger mode: automatic, regular, single

Tigger Type: Rising edge. falling edge

Trigger level: adjustable, with indication

Waveform Freeze: Yes (HOLD function)

Automatic measurements: max, min, average, rms, peak-to-peak, frequency, period, duty cycle

PWM output: FRQ: 0~80KHz, duty cycle: 0~100%, amplitude: 5.0V

Electronic Component Tester Specifications:

Capacitance measurement range: 25pF~100mF (capacitance value, diipation factor Vlo)

Resistance measurement range: 0.01Ω~MΩ

Inductance measurement range: 10uH~1000uH

Battery measurement range: 0.1~4.5V

Input voltage: 0~16V

PWM output: 1.5KHz~9.99MHz

Packing list without adapter:

1 * Tester

1 * Type C cable

3 * Test hook

1 * Probe

Packing list with adapter:

1 * Tester

1 * Adapter

1 * P6100 High Voltage Probe

1 * Type C cable

3 * Test hook

1 * Probe