2000W/2500W/3000W Water Heater Immersion Boiler for Bathtub inflatable swimming pool 2000W/2500W/3000W Pink

2000W --- Black 2500W --- White 3000W --- Pink All types are same , on the picture
Specification:
Material: Stainless steel tube+
Length: 21.5cm
Rated voltage: AC 220V-250V
RMS : 2000W
Maximum : 3000W

Features:
-Ideal for using at home.
-This Immersion Heater is quick and safe.
-Perfect for heating in the bathtub, bucket etc.
-Suspended water heater - life increased by 3 times, more durable.
-Sealed design, suspended heat fast -water and electricity separation, more secure.

Instructions:
1. First, plastic barrels, bath barrels, bathtubs, swimming pools, fish tanks, barrels, buckets and containers filled with water. Into the water heater, water level to ensure that the water heater suspended in the water.Water level in more than 25 to 30 cm into the heater. The product will automatically float on the surface, by adjusting the cord, you can let the heater suspended in the right place.
2. If the container water level is not enough 25 cm, the product can not be suspended in the water, please ensure that the heating pipe must be submerged in the water, the heater can be slightly tilted a little use.If it is inflatable swimming pool or bathtub and material containers. For safety reasons, you can put a ceramic under the heat pipe to avoid direct contact with the heat pipe.
3. The container is filled with water, put in the heater plug the head waiting for the heater indicator light, the heat pipe around the distribution of many small bubbles, and began to heat.If the water is large, heated to half of the need to unplug the plug, try the water temperature.
4. When the water temperature reaches the required temperature, first unplug the plug, wait 20 seconds to take out the heater. You can use water.

Package include:
● 1 x Hot Water Heater

Note:
1.Heating time:
Heat 100 liters of water to about 40 degrees
2500W: about 75 minutes
3000W: about 60 minutes
2.Selection of sockets
-Please plug directly into the wall socket and use 3000W for wall socket.
-The house line has more than 2.5 square feet, and it can use 1-2 3000W heaters at the same time to separate the socket with different positions.
3.Water temperature
-The heater is heated for the separation of water and electricity. The design is not leakage.But for safety, please pull the plug and try the water temperature.
-Before testing the water temperature, please stir down the water and again. It is very convenient to use the electronic .

Warning:
-If it is a container such as an inflatable pool or bathtub, a porcelain bowl can be placed under the heat pipe to avoid direct contact with the bottom of the heat pipe.
-The body cannot touch water when using the heat pipe. The plug must be unplugged before using water.








a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a