2.6inch IPS LCD Screen Kits for GBC Screen With Pixel 4Points to Pixel 1Point Display LCD Kits for Nintendo Gameboy Color

New 2.6inch IPS LCD Screen Kits for GBC Screen With Pixel 4Points to Pixel 1Point Display LCD Kits for Nintendo Gameboy Color

Notes:

- The picture installation tutorial is below, please strictly follow the tutorial below to install. The wire on the flex cable goes to the positive terminal of the battery holder! ! !

- We welded the wires before delivery, and the wires are just a small solder joint, which is easy to fall off. If the wire falls off, please re-solder it yours, thank you.

- Please be careful when connecting the cable, if the cable is plued upside down, it will definitely out the fuse of the GBC motherboard! ! !

- The LCD screen has a backlight and displays a black screen. In this case, either the LCD screen is cracked, or the cable is not plued in properly.

- If there is no backlight on the LCD screen. It must be that the cable is not plued in properly, or inserted backwards, or the wire is not connected to the positive pole of the battery holder.

- Each set of LCD screens is tested before shipment. Do not install or tear the protective film before installation. First, pls plug in the cable and conduct a power on test to avoid subsequent installation errors that may cause the LCD screen to malfunction and help clarify responsibilities. We will be responsible for pre installation testing if there are any iues.But if it is installed without testing, the LCD screen will crack and tear off after installation, we can not support return.hope you will understand it ,thx.

Product Description:

1.Use 2.6 inch IPS LCD screen, it is larger than the 2.45 inch LCD screen ,and it has a normal color temperature, neither blue nor yellow. No welding required, just need cut a little of shell, simple installation.

2. Support point-to-point display. Support black and white style screen display effect. High brightne display. Pre and hold the touch sensor for 3 seconds to switch the display style. Short pre it to adjust brightne. It support 8 levels brightne adjustment.

3. Low power consumption. Testing with Xiaomi 1800mAh rechargeable battery, the highest brightne of the screen, with EDGB f memory card, the normal game time is about 5 hours.

4. Support brightne adjustment memory, display style memory, no need to reset when booting.

Package included:

1 x LCD Screen Kit

Installation Precautions:

- Do not pull the LCD screen cable. Pulling the LCD screen cable will display horizontal and vertical lines, which cannot be repaired. Especially if the LCD screen is stuck on the double-sided tape, if you pull the cable to remove the LCD screen, it is not bad but also an internal injury.

- Do not the LCD screen. Squeezing the LCD screen frame and back cover will cause the backlight display of the LCD screen to be uneven, and light spots and dark spots will appear.

- To install the LCD screen, try to tear off the film and install it at one time. Do not touch the LCD screen after tearing off the film, as it is easy to leave dust and fingerprints.

- The package sold is only different in the mirror, and the other configurations are the same. The mirror can be used. The matching mirrors are made of gla.

-When the battery is low, the backlight of the LCD screen will f, just rep the battery.