2" 52mm 10 Color LED Backlights e Face Oil Press Oil Pressure Meter w r Mount Bracket Cup Holder EPXX704

You are buying on 100% of:

EPMAN 2" 52mm 10 Color LED Backlights e Face Oil Pre Oil Preure Meter w r Mount Bracket Cup Holder EPXX704

Product Description:Item name: Oil Pre Diameter: 2"/52mmCurrent: IGN MAX 0.3A ILM 0.3APower: DC(10-15V) 12V ProfeionalReading Range: 0-10 x100kpar Thread Size: 1/8" NPTLED r Color: 7 Color display+3 Light ColorPackage includes:1 x Oil Pre 1 x Mount Bracket Cup1 x Meter Wire1 x Power Supply Wire1 x r1 x r Wire1 x Double Sided Tape2 x er1 x English Manual(same as the picture)Features:-2" (52mm) diameter .-Bladial face when ignition is off.- 10 colors backlights can be selected, and it can memory the setting in the both daytime and night mode.-Brightne can be selected in 6 different levels, and it can memory the setting in the both daytime and night mode.-3 types can be selected (slowly →fast→all the time).-4 levels can be selected. (silence →resounding)-5 Varations open ceremonies can be selected.-A warning value (arbiry) can be set and the warning can be selected from three variations or turn off.-Data obtained during driving (top value and warning value) can be stored up, and the top value can be reviewed and cleared.-Flat gla,high-definition scale and long,narrow pointer provides accurate indication and high visibility.-Brushle sting motor is used to enable a smooth, instantaneous response to high performance sport driving.Common on Operation:1.There is a on in the backside of the .They are used to review and clear top value,change the colors, adjust the brightne, choose the , set the warning etc.2.Short pre to switch between different functions settings,pre until sounds, then enter the setting mode.It will return to normal status when the on is released after 5 seconds.52mm Pod:Universal Pod made with blaABS PlasticPod can hold all 52mm (2 inch) sPod holder can be position on your dash, any little flat surface, use as a starter mold for your fiberglaThere are several of the same series:1:Turbo (BAR) (-1BAR-2BAR)2:Water Temp (20-120 Celsius)3:Oil Temp (50-150 Celsius)4:Oil Pre (PSI) (0PSI-140PSI)5:Turbo (PSI)(-30PSI-30PSI)6: (10V-15V)7:Oil Pre (BAR) (0BAR-10BAR)8:Exhaust Temp (2-11 x100 Celsius)9: (0-9x1000 RPM)Please clihere to see detailsOil Pre :Reading Range: 0-10 x100kpar Thread Size : 1/8" NPTPackage includes:1 x Oil Pre 1 x Mount Bracket Cup1 x Meter Wire1 x Power Supply Wire1 x r1 x r Wire1 x Double Sided Tape2 x er1 x English ManualOil Pre Part No.:EPXX704

Note:● The product is designed for use on 12v vehicles.Do not install this product on vehicles with 24v syst.● Do not perform installation of this product immediately after the engine has been switched off. The engine and exhaust system are extremely hot at this time and can cause s if touched.● The LED color display of the actual it may slightly different from the listing images due to different computer screen, thanks for your understanding.● Instructions Is Included.Profeional Installation Is Highly Recommended!!If you want to know how to use or install it,please contact us by Email.We will provide help as much as poible.

All it are unle stated otherwise on the listing. We sell DIY (Do It Yours) It with a few exceptions. We take no responsibility in teaching you how to install. Profeional installation is strongly recommended.