1PCS/LOT 150W Boost Converter 300W Step Down Buck Converter DC 5-40V To 1.2-35V Power module XL4016 Step Up Voltage Charger

Warm reminder:

150W is the lifting voltage module

300W is the lowering voltage module

150W Boost Converter DC 10-32V to 12-35V Step Up Voltage Charger Module

Module Properties: non-isolated step-up module (BOOST) 65 * 56.5 * 23 (length * width * high) (mm) Input voltage :10-32V Output voltage: 12-35V (adjustable) Output Current: 6A (MAX) Input Current: 10A (MAX) (Please enhance heat diation if more than 10A) Output power: natural cooling 100W (MAX), enhance heat diation 150W (MAX) Easy to drive 65W 90W dual-core notebook. Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45°c Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A) Output Rple: 2% (MAX) 20M-bandwidth Operating Temperature: Industrial (-40°c to +85°c) (ambient temperature exceeds 40°c, lower power use, or to enhance heat diation) Full load temperature rise: 45°c No-load current: 25mA typical Voltage regulation: ± 0.5% Dynamic response speed: 5% 200uS Short circuit protection: None (Please Install fuses and protection circuits at Input port.) Input Reverse Polarity Protection: None (Please Series diode at the input port.)Some Applications: 1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be 14-35V(adjustable freely), However, the output voltage can not be le than the input voltage. 2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.

Size: 65 (long) * 47 (wide) * 23.5 mm (high) (not including the pillars) (new version) Module parameters Module properties: unfenced booster module (BOOST) The input voltage: 10-32 v (1) continuous adjustable output voltage (12-35 v) (2) fixed output (select) between 12-35 v, when buying, please tell the shopkeeper. Output current: 10 a (MAX) Input current: 16 a (MAX) (please strengthen heat, more than 10 a) Output power: natural cooling 100 w (MAX), strengthen heat 150 w (MAX) real power use time more actual situation, please Decide whether to add fans, please be sure to ensure heat sink temperature not to exceed 80 degrees. Easily lead to 65 w, 90 w notebook computers Including dual - With A 12 v battery with ordinary 19 v 3.42 A laptop module temperature of about 45 degrees Conversion efficiency: 94% (16 v input measured output is 19 v 2.5 A) (for reference only) The output rple: 2% (MAX) 20 m bandwidth Working temperature: industrial grade (- 40 to + 80) (ambient temperature more than 40 degrees, please reduce power use, or add the fan) With temperature rise: 45 No-load current: typical 25 ma Load regulation: plus or minus 0.5% Voltage regulation: plus or minus 0.5% Dynamic response speed: 200 us 5% Short circuit protection: no (please input with fuse or protective circuit) Input reverse connect protection: no, the buyer can be in the input series diode. Connection mode: from welding, and terminals

300wbuck dc :

Dimensions: 65 (length) *47 (width) *23.5 (height) mm

1. Module properties: Non-isolated step-down constant current, constant voltage module (CC CV) charging module 2. Input voltage: DC 7-32V 3. Output voltage: (1) DC 0.8-28V continuously adjustable. (2) Fixed output:Choose between 0.8v-28v 4. Output Current: 8A (when power tube's temperature exceeds 65 degrees, please add cooling fan) 5. Constant current range: 0.2-8A ( adjustable ) 6. Turn lamp current: Constant current value * ( 0.1 ) , turn the lamp current and constant value linkage, such as constant current value is 3A, turn the lamp current is set to a constant current is 0.1 times (0.1 * 3A = 0.3A). 7. Lowest preure: 1V 8. Output Power: Maximum power is about 300W 9. Conversion efficiency: Up to about 95% 10. Operating frequency: 300KHZ 11. Output rple: 20M bandwidth 12. Input 24V output 12V 5A rple around 50mV (Excluding noise) 13. Output short circuit protection : Yes, constant current 14. Input reverse polarity protection: None 15. Output prevent backflow: None 16. Wiring: Terminal 17. No-load current: Typical 20mA (24V switch 12V) 18. Load regulation: ± 1% ( constant ) 19. Voltage regulation: ± 1% 20. Dynamic response speed: 5% 200uS 21. Potentiometer adjustment direction: clockwise (increase) , counterclockwise (decrease), the potentiometer(CV) closed to the input voltage is used to regulate voltage, the potentiometer(CC) closed to output voltage is used to regulate current (CC) 22. Operating temperature: Industrial grade (-40 °C to +85 °C) ( please note the actual use of the power tube temperature , high temperature heat strengthened) 23. Indicator: dual color indicator, charging indicator light is red, the green light means fully charged ( No load is green ) 24. Size(approx): 65 x 47 x 22mm (L x W x H) 25.Precision of constant current and temperature: On the actual test, the module temperature from 25 degrees to 60 degrees, the constant current value change is le than 5% (5A constant current value) 26. Output short circuit protection: Yes,Constant current (the current setting constant current value) 27. Input reverse connect protection: NO 28. Output prevent reverse flow: NO 29. Wiring Method: amphenol connector Features: 1. Fixed turn lamp current is 0.1 times the current value ( Used to identify whether the battery is fully charged When charging). 2. Made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20°C to 100°C constant current 1A, temperature drift le than 1%). Particularly suitable for LED driver. 3. High output current, the max output current can reach 8A. 4. Four high frequency capacitance, can lower output rple, enhance the work stabilization. 5. Double heat sink design. MOS schottky diode independent heat sink,which heat diation is good, and won't affect each other. 6. Using large size Sendust Core and double pure copper wiring, improve working efficiency, reduce fever. 7. 3296 potentiometer,high accuracy voltage and current regulation, good stability. 8. Double color lamp, working condition be clear at a glance 9. Voltage and current are adjustable,wich effect is good. Applications: 1. High-power LED driver. 2. Lithium battery(or lead aculator) charge. 3. Vehicle-mounted power supply. 4. Low voltage system power supply. 5. 6V, 12V, 14V, 24V battery charge. 6. On-board laptop power supply. 7. regulated power supply. 8.Low voltage power supply system. Battery charge: 1. Make sure of the battery float voltage and charging current that you need, as well as the input voltage of the module. 2. Adjust the constant voltage potentiometer and adjust the output voltage to about 5V. 3.Use the multimeter in 10A current scale to measure output short-circuit current, and adjust the current potentiometer to make the output current to the expected charging current value. 4. Adjust the constant voltage potentiometer to make the output voltage reaches the float voltage. 5. Connected to the battery, try to charge. (1,2,3,4 steps to connect the power module input,output no-load does not connect battery.) LED constant current drive: 1. Make sure the operating current and Max operating Voltage of the LED you need to drive. 2. Adjust the constant voltage potentiometer, adjust the output voltage to about 5V. 3. Use the multimeter in 10A current scale to measure output short-circuit current, and adjust the current potentiometer to make sure the output current to the expected LED operating current. 4. Adjust the constant voltage potentiometer to make the output voltage reach the maximum LED operating voltage.

5. Connect LED, test. (1,2,3,4 steps to connect the power module input, output No-load does not connect LED.)

1x MODULE

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.