1PCS USB 3.0 to mSATA SSD Hard Drive Case For Windows 2000/Xp/Vist /7/8 /Mac os 7.0 Adapter Card Reader Plug And Play

Package : YesModel Number : USB 3.0 to mSATA SSD Hard Drive CaseType : Hard Drive AdaptersBrand Name : ANENG : Mainland ChinaCertification : none
Feature100% and high-qualitySupports 3 * 5cm mSATA SSD to USB 3.0 interface.High end quality products with stylish exterior design.USB 3.0 interface. Plug and play.Compatible with Windows 2000/XP/Vista/7/8/Mac OS 7.0 and above.Size: 8.0cm * 4.0cm * 1.0cm/3.15 "* 1.57" * 0.39“Attention:The performance of this product is constantly improving, and if there are any changes, they will not be notified separately or even slightly. The pictures are for reference only, and the products available to us shall prevail.Incompatible with SATA MINI PCI-E SSD/PATA MINI PCI-E SSD and RAID MINI PCI-E SSD.Please note that when querying the rated current of an SSD, calculate the maximum power supply current of 1A for the USB 3.0 interface. If the USB port cannot provide sufficient current to the SSD, the computer will not be able to recognize or work properly because the power supply cannot meet the requirements; If these issues are within the USB 3.0 interface of your computer, please try accessing the USB 2.0 interface for testing, as it can reduce speed and power consumption.The operation of SSDs releases heat, causing the shell to explode and become very hot, which is a normal phenomenon.Please try not to use a USB extension cable as it may not meet the normal operating current requirements of the SSD.If your hard drive has a password set in the computer, please cancel the hard drive password. If the password is not cancelled, the other computer will not be able to recognize the hard drive.Please enter the disk manager into the hard drive partition and format the hard drive. If you open "My Computer" and do not see the increase in disk partition, please do not enter it.Fault phenomenon of USB port unable to meet the rated current of SSD:A: Unable to recognize SSD, but adapter card cannot install SSD connected computer, computer can recognize new hardware.B: The adapter card is continuously disconnected after connecting to the computer.C: Products that connect to computers can read data from hard drives, but cannot write data to or format hard drive partitions. Writing data will disconnect or the computer will not respond (this phenomenon can occur if the hard drive has a bad sector, please distinguish it).Regarding the Mini PCIe SSD interface standard:1. The Mini PCIe interface has six A: mSATA solid-state drives defined using the SATA protocol; B: The SATA MINI PCIE solid-state drive has a SATA interface, but its pin definitions are different from those of mSATA solid-state drives; C: PATA MINI PCIE solid-state drive, which has the nature of an IDE interface; D: Raid mSATA; E: 3G or WIFI module; F: Inter Turbo Memory The interface definitions for Six types look exactly the same, so please make sure to differentiate the interface definitions for your solid-state drive.2: The Mini PCIE interface is solid and sturdy, with different interface definitions and length differences: A: half height, 2.7 centimeters length; B: Full height, 5 centimeters length; C: It's 7 centimeters length, only 3 centimeters by 5 centimeters in size!Attention:Manual measurement of dimensions may have an error of 0-2 centimeters, which is a normal phenomenon.And due to differences between different monitors, the images may not reflect the actual color of the project. Thank you!The package includes (without retail package):1Pc xUSB3.0 to mSATA SDD hard drive enclosure