1pcs New Model Wireless Pro Game Controller For Nintend Switch Console Switch Gamepad Joystick CHSMALL

1pcs  new model Wireless Pro game controller for Nintend Switch Console switch Gamepad Joystick for Windows PC 360 mode note: this is a bluetooth joystick for switch console and windows PC 360 mode(USB connection)   1. Connection instruction 1) Connecting to Switch Console via Bluetooth A. Connecting to a Switch console for the first time: Power on a Switch console, on the main interface of the console, use your finger to click “Controllers” → “Change Grip/order” to come to this interface “Press L + R on the controller”, ignore “L + R”; press “Y” plus “HOME” combinatorial keys and hold for 5s to power a controller on, four LEDs in the controller start blinking quickly and circularly, when one of the four LEDs is solid bright, it means that the controller is paired with the console successfully. Press “B” key to return to the main interface of the console. B. Connecting to a paired Switch console: If a controller was paired with a Switch console ever before, just press “HOME” key and hold for 2s to power the controller on, the controller will be connected to the console automatically again. C. Controller awakened up: If a controller is in sleeping mode, short press “HOME” key to awaken it up, it will be connected to the console again automatically.   2) Connecting to Switch Console via USB cable Connect a controller to a Switch console through a USB cable, LED 4 in the controller will be blinking slowly; on the main interface of the console click “Settings” → “Controllers and Sensors” → “Pro Controller Wired Communication” → “ON”, the controller will be connected to the console via wired connection, LED 1 will be blinking slowly during wired connection.   3) Connecting to Windows PC via USB cable PC 360 driver is required to be downloaded to a Windows PC at first, connect a controller to the Windows PC through a USB cable, four LEDs in the controller will be blinking slowly, after the driver is installed to the PC automatically and successfully, LED 1 and LED 4 in the controller will be blinking slowly, the controller is ready for use. Games of PC 360 mode are supported. Note: With vibration function but without axis function under wired connection PC 360 mode.   2. Product brief introduction 1) This Pro controller is compatible with Switch console also supports Windows PC and Android device. 2) No need to install any driver, it can be used once connected to Switch console. 3) Wireless Bluetooth V3.0 connection, lower interference, stable connecting signal and ease of handling. 4) Built-in with 300mAh polymer lithium battery, it can be continuously used for around 5h after fully charged. 5) It supports Gyro axis function and dual motors double-shock function. 6) Up to four wireless Pro controllers can be connected to a Switch console simultaneously. 7) It can be used normally even during charging. 8) Ergonomic design and light weight construction make it comfortable even for long hours of continuous gaming. 9) It can be upgraded by update software via connecting it to PC. 3. Button brief description 1) HOME key: Power controller on or execute commands from Switch console. 2) D-Pad: Up, down, left and right. It can be easily operated on eight directions. 3) Function control keys: A, B, X, Y. Perfect key design, sensitive and quick for finger operation. 4) Left stick and Right stick: Neoteric 3D stick can be operated precisely on 360° all-round. 5) Functional keys: L1, R1, L2, R2. Trigger and shoulder keys perform quick response function. 6) Screenshot key: Take screenshot and store. 7) TURBO key: First press and hold any key of the eight function keys (A/B/X/Y/L1/R1/L2/R2) then press “TURBO” key once to accelerate along with the function key blinking quickly and automatically. Press “TURBO” key once again to cancel the acceleration function. 8) Reset key: Short press this key in “RESET” hole to disconnect controller from console and reset the controller.     4. LED indication instruction 1) Four LEDs blinking quickly and circularly: This controller is searching for Bluetooth to be paired; this controller is connecting back to console via Bluetooth code match. 2) LED(s) solid bright: This controller is connecting to console normally via Bluetooth. 3) LED(s) blinking quickly: This controller battery voltage is lower than 3.6V; if the voltage is lower than 3.4V, the controller will be shut off automatically and can’t be powered on. 4) LED(s) blinking slowly: This controller is connecting to console via USB cable; when this controller is being charged via connecting to a charger, four LEDs are blinking slowly, the four LEDs will be off after fully charged.   Panckage included:   1 pcs Wireless game controller for Nintendo Switch   1 user manual   1 USB cable
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a